It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

NO MELT, NO DRIP (50/50 NYLON COTTON) Incorporate 4-way stretch Tweave (Waist band, knees, Groin) Universal knee pad pockets Mesh and string rubber tip at the bottom to improve convenience Fit adjustment though the Velcro behind the knee and bottom parts to protect body temperature and support agile activity Front low profile, rear and ventilated cargo Pockets Applied MIL-SPEC threads and YKK zippers Composition Material: NYLON 50% / COTTON 50% Size : Waist 28~36, Leg S, R, L Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Product Description and Features 1. Usable Time: Approximately 4 hours 2. Breathable Coolant: Semi-permanent (reusable) 3. Oxygen cylinders and valves: Inspected by the Korea Gas Safety Corporation (KGS) 4. Materials: Outer fabric and PET material are heat-resistant. 5. Drain Button: A device for removing moisture depending on the usage time. 6. Supply Button: A device that temporarily provides a large amount of oxygen. 7. Facepiece: Includes a manual defrost for long-term use. 8. Electronic Pressure Indicator with IT Technology: Life-Saving Alarm (PASS) function, ambient temperature display, container pressure display, automatic alarm for low pressure (approximately 50 bar), usable time display, battery status display, and NFC-based personnel monitoring system (free software provided). 9. Accessories: Bone conduction communication equipment can be applied.

- To check and verify the RWR system on the aircraft and radiate threat signals to RWR antenna through couplers. - Radiate threat signals to jammer system.

From key military, security, and incident response operations, to a variety of commercial development and research initiatives, GXP provides a comprehensive suite of solutions to inform effective decision making and ensure a safer world.

It is designed to be suitable for difficult environments and can be applied to high torque and angle control. Applications are Missile defense, Torpedoes, Anti-drones system, Underwater drones.

Nara Space’s first standard nanosatellite for Earth observation constellations with 7 optical bands and 1.5 m GSD. Launched November 2023 to the 525 km of the orbit, it has 2 years Mission Lifetime.

REP series is easy to use for quick mating. The REP panel and cable connectors are a highly cost-effective interconnect system, which solves the constant need for simple and reliable connector solutions in rail applications. A full plastic solution offered in either wire attachment or PCB mounting options to provide rapid assembly installation without requiring additional mounting hardware. Cable receptacle connectors are available to mate with the cable plug connectors for cable-to- cable solutions when needed. The series is qualified to French and European rail standards. The connectors are available as one overmolded plastic part to save assembly time.