NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars

Designed to support U.S. DoD modernization strategies, REDCOM Sigma is a complete software-based Command & Control solution with voice, video, chat, and conferencing. REDCOM Sigma® increases the warfighter’s operational flexibility while reducing size, weight, and power (SWaP) requirements at the tactical edge. REDCOM Sigma is based on open standards with a focus on interoperability, flexibility, and ease of use, and is listed on the DoDIN Approved Products List (APL). REDCOM Sigma was selected by the U.S. Army’s Program Executive Office Command, Control Communications-Tactical for network modernization at the tactical edge. Sigma is being deployed to multiple programs within the U.S. Army at the battalion level and below.

Hermetic connectors are essential to maintain system integrity in applications where the reliability and performance of electrical connections is critical, such as gas-tight barriers or high-pressures differentials.

Counter-UAS Solutions for Government & Defense

Duratek’s motor drive power supply is engineered to absorb excess energy during motor regeneration and braking phases, ensuring consistent and stable voltage delivery.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

Main Features of CLS-30T5 Camera Link Compatibility: Supports all Camera Link types (Area Scan / Line Scan). Video Distribution: 1:5 distribution capability supporting Base, Medium, and Full configurations. Power over Camera Link (PoCL): Performs PoCL Bypass functionality. Pixel Frequency: Supports a pixel frequency range of 20 MHz to 85 MHz. Transmission Quality: Ensures lossless video signal transmission. Power Connector: Equipped with a lockable DC power jack (Molex connector). Interface: Supports MDR-26 type connectors. Control Signal Support: Supports all standard RS-232 communication speeds.

The Boreas 50 fiber optic gyroscope (FOG) is a highly accurate and reliable navigation technology. It’s the result of over 25 years of development in partnership with two research institutions. The gyroscope uses a closed-loop optical coil and an advanced spread-spectrum digital modulation technique to improve accuracy, stability, and reliability while reducing size, weight, power, and cost. Gyrocompass North-Seeking The Boreas range of fiber optic gyroscopes (FOGs) can determine heading without needing a Global Navigation Satellite System (GNSS) or a magnetometer. By sensing the Earth’s rotation, the system’s north-seeking algorithm can acquire an accurate heading. This is possible in static and dynamic conditions, even at high latitudes. Reliability Boreas 50 has been designed from the ground up for rugged reliability. Both the hardware and software are tested and certified to environmental and electromagnetic standards (MIL-STD 461 and MIL-STD 810H). The precision aluminum enclosure is waterproof and dustproof to the IP67 standard. The system is resilient to shock and vibration, allowing it to be used in extreme conditions. Industry-Leading SWaP-C The Boreas 50 FOG Series delivers industry-leading performance with a compact and lightweight design. Excelling in terms of Size, Weight, Power, and Cost (SWaP-C). Multi-Protocol Support The Boreas 50 features multiple interfaces, including Ethernet, CAN, RS232, 1PPS, RS422, and GPIOs. It supports industry standard protocols, including NMEA 0183, CANopen, 1PPS, and ANPP, as well as a wide variety of proprietary protocols. A rich, responsive embedded web interface provides full access to all of the device’s internal functions and data. Internal storage allows for up to one year of data logging.