ENGINeUS™ Aircraft Electric Motors are self-contained direct drive propulsion power pods. This modular and scalable machine allows an easy integration into a vehicle whilst maintaining optimization of the propulsive function of new mobility platforms and hybrid turbomachinery.

C-17 GLOBEMASTER III

Investigate the smallest of features with spatial resolution down to 600 nm – A state-of-the-art nano-focus x-ray source, precision stages, and high-quality detectors work together to deliver sub-micron resolution imaging. Perform true 4D imaging with Dynamic CT – High temporal resolution, continuous and uninterrupted scanning, and specialized 4D software tools bring synchrotron-like capabilities to the lab. Implement 3D in situ experiments – continuous sample rotation and scanning enable uninterrupted in situ experiments. Dedicated “no-cable-wrap” interfaces simplify experiment set-up. Accommodate a broad range of samples – UniTOM HR’s high power source (50W), multiple detector options (up to 3) and heavy load stage (45 kg) accommodates samples up to 500 mm diameter X 700 mm high. Maximize system utilization and throughput – A fast frame rate detector and a high flux x-ray source combine for high temporal resolution tomography giving you the ability to scan more samples and accommodate more users.

The MAGIC1A is a rugged 3U VPX SWaP-C3 high-performance embedded computer combining an Intel Xeon E3-1505M v6 CPU and NVIDIA Quadro P2000 GPU, offering strong compute performance, broad I/O, rugged resilience, and flexible software support. • Xeon E3-1505M v6 quad-core CPU + Quadro P2000 GPU → ~2.3 TFLOPS • Ethernet, USB, serial, MIL-STD-1553, ARINC 429, DisplayPort/DVI, GPIO; up to 8 TB removable SSD with fast-purge • MIL-STD rated, baseplate or fan cooling; −40 °C to +65 °C range • Supports Linux/Windows/VxWorks & CUDA/OpenCL/DirectX/OpenGL; includes AXIS software toolkit

This solution follows a three-step process of input, processing, and output, utilizing imagery, DEM, AT, and spatial data to refine 3D models. The editing-based texturing function allows users to correct shape errors, occlusions, and distortions, while the automated texturing ensures consistency and accuracy through advanced geometric matching. Final outputs are stored in standard formats for broad practical applications.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Haigh-Farr designs support hardware to work hand-in-hand with our solutions to maximize performance. Our support hardware utilizes the same well-proven construction as the antennas they support. Power Dividers, Combiners, Hybrids & Diplexers

We has built a global partnership with accumulated technology to produce/supply major structures to Boeing and Airbus. By manufacturing large-scale composites that make the fuselarge of an aircraft, automated production technology applying robot concepts, non-destructive inspection technology and flow production line, etc. we are competing with advanced aircraft manufacturers with the best technology, quality and productivity by developing advanced technologies and equipment.