AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

Compact & Lightweight Design for Quick Assembly & Disassembly, Maximizing Portability. Small Fixed-wing Drone Specialized for Aerial Surveying, Surveillance, and Reconnaissance, ensuring Optimal Operation Without Space Constraints. Flight Time : 90min (No Payload) / Cruise Speed : 20m/s, 28m/s (Max) / MTOW : Under 8.6kg Aircraft Size : 2432x1581x403mm / Max Payload : 500g / Range : 3km (Varies by Communication Equipment) / Weight : 8.1kg (With battery, No payload) Application : Aerial Surveying, Reconnaissance, High-Resolution Picture/Video, Payload Drop

The EXOpod is the most advanced cubesat deployment system on the market. It is available in 6U/8U, 12U and 16U sizes which can be broken down into smaller slots to accommodate cubesats of any size. EXOpod Nova, the latest generation of the EXOpod line, is rapidly expanding what the cubesat design standard (CDS) is capable of – cubesats launching with Nova can now increase the volume of their lateral protrusions by 400% and their mass by 30%, enabling a wider and more powerful array of satellite designs and use cases.

The QVM-200 is an ultra-compact video transmission module mounted on a small device that compresses camera video in real time and transmits it to a remote control device. This product features a built-in H.264/H.265 codec, compressing high-definition video at FHD (1920x180p) @ 60fps and UHD (3840x2160p) @ 30fps. It also supports various video transmission protocols, enabling real-time video control and operation. In particular, the QVM-200's built-in real-time high-compression video transmission technology enables ultra-low bandwidth video transmission, ensuring stable video transmission even in wireless environments with extremely limited bandwidth. It provides a MIPI camera interface and a USB port for connecting EO and IR cameras. Its minimal size and weight allow it to be installed even in ultra-compact drones with limited space, weight, and power consumption.

The FOR-10T/R supports Base configurations (including 10 Taps) and enables long-distance transmission of image signals via optical fiber, along with RS232 control signals and CC1~4 trigger signals. These signals are transmitted to the PC. This product supports transmission distances of up to 2 km, and by replacing the optical module, even longer distances can be achieved.  Fully supports the Camera Link interface (Area/Line Scan).  Supports Base (including 10 Taps) configurations (CC1~4, RS232, 10 Ports (Taps), LVAL, DVAL, FVAL).  Supports pixel frequency from 20 to 85 MHz.  Maximum transmission distance: 2000 m.  Enables lossless transmission.  Supports all external full-duplex RS232 communication speeds on a single port.  Features a locking DC power jack (Molex).  Camera link Connector Type : SDR connector.

The PolarFire FPGA and PolarFire SoC families already deliver the industry’s best thermal and power efficiency in the mid-range segment. Optimized for deploying systems with high-compute performance in small form factors, the families have reduced the size and weight of power-constrained systems in applications including industrial imaging, robotics, AI-enabled medical systems and smart defense and aerospace systems.

CPPA Procedure : 1. Requirement Analysis for Customer's parts Purchasing 2. Parts Purchase Negotiations 3. Parts Purchasing Management 4. Component Reliability Testing 5. Space Parts Documentation Support 6. Delivery to the Customer

Our software enables engineers to analyze and optimize their preliminary designs in the best way possible – at the whole aircraft level – which not only saves time but money as well. With its Multi-disciplinary Analysis and Optimization (MDAO) approach, you can model aircraft and their subsystems, assess performance, and generally accelerate your progress in numerous design challenges. Whatever your aircraft preliminary design goals may be, Desmo has a solution.