Model DCL120 Dot Sight is designed and developed specifically for use on .50 caliber (12.7mm) Heavy Machine Guns (HMGs) but not limited to the HMG. This distinctive dot sight adapted the world’s first extra wide lens (170 x 70 mm) which provides accurate shooting in jolting armored vehicles, shaking helicopters and rocking patrol boats with head-up and both eyes open. Unique features: icon3Extra wide lens (120x70mm) allows operators to track moving target with both eyes open. icon3Designed specifically for HMG icon3Solid construction for repeatable accuracy icon3Integrated recoil compensator retains prevents loss of sight picture on high recoil weapons icon3Each sight is CNC machined from a solid block of 6061-T6 aircraft aluminum.

Next-generation wheeled military vehicles are essential to secure maneuverability and survivability for efficient power operation even in the worst weather and terrain conditions, so we have developed a run-flat product with pure domestic technology that can drive to a safe zone where tires can be repaired and replaced with quality that meets the standards of the United States and NATO (North Atlantic Treaty Organization) while ensuring stable steering and driving performance by applying our unique design in the event of tire pressure loss due to tire damage. Based on this, we produce and supply run-flat-related products to wheeled military vehicle manufacturers.

Developed in 2002 as a single-soldier, short-range, anti-tank weapon system, we continue to work with soldiers to provide the weaponry needed to succeed. Backed by nearly two decades of experience, the resurgence of the tank in battle validates our expertise in this field. It’s the same old story – and David still beats Goliath.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

The SC-SSGMRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SSGM(Synchronous Signal Generation Module). When the SSGM(Synchronous Signal Generation Module) board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SSGMRTM board into the back of the Backplane. Three 37-pin Micro D-sub ports are used to send synchronization signals generated by SC-SSGM to the outside or to receive external synchronization signals, Three separate MMCX output ports are prepared to support test equipment such as oscilloscopes, and you can convert them to various signals and output them.

Poongsan participates in the defense industry based on its production technology for copper and copper alloy products, which are the basic materials for ammunition, and has large-scale dedicated production lines for each type of ammunition at its Angang and Busan plants, supplying everything from 5.56mm small-diameter ammunition to 155mm howitzer shells for the military. We develop and supply all types of ammunition for use. Poongsan has an integrated production system that not only procures materials and parts such as new ammunition, propellants, and links, but also fills and assembles gunpowder, thereby achieving high competitiveness in quality, price, and delivery. Poongsan produces ammunition of various types and calibers, including anti-aircraft shells, mortar shells, howitzer shells, tank shells, recoilless rifle shells, naval artillery shells, and aviation shells. In particular, in recent years, new types of ammunition have been developed, such as anti-tank ammunition with improved penetration, range extender ammunition with dramatically extended range, Goal Keeper ammunition used in Korean destroyers, and dual-purpose ammunition that can suppress tanks and multiple troops at the same time. We are also achieving great results in improving the performance of conventional ammunition. Additionally, MLRS (Multiple Launch Rocket System) and are responsible for the production of combined warheads including submunitions, which are key components. Poongsan operates an independent quality control organization separate from the production division, and in particular, has a perfect quality assurance system, with each process and lot undergoing strict inspection by a government inspection agency. Poongsan will continue to contribute to independent national defense by improving the performance of existing ammunition based on a consistent production system and advanced quality control system, and by promoting continuous research and development of advanced precision ammunition in line with the changing trends of modern warfare, which is becoming more advanced due to scientific development. It will.

- Operates by an internal pipeline open/close mechanism controlled by a solenoid valve - Relief plug: prevents malfunction due to internal pressure expansion - Manual discharge available via manual handle when power is OFF - Outputs an abnormal signal if the reference pressure drops due to extinguishing agent leakage

Additive manufacturing: - allows highly efficient, compact recuperators with custom flow paths, maximizing energy recovery and reducing overall system emissions. - charge air coolers enhance cooling performance with tailored airflow designs, reducing intake temperatures and boosting engine efficiency. - delivers precise, space-efficient pre-coolers and heaters, ensuring optimized thermal response and energy efficiency for various industrial applications.