- Detects fire through heat sources when installed in areas where optical fire detectors are difficult to apply, such as in the presence of contaminants or obstructed visibility - Capable of detecting fire even if the sensing line is severed - Length can be adjusted depending on the equipment applied

1) Fabrication - possible Dismension : ~ D 1200 mm - Surface Errors PV < 79 nm RMS < 12 nm Roughness < 2 nm(Typical < 1nm) 2) Lightweight - lightweight Ratio : up to 82.5 % - Rib Thickness : ~ 2 mm - Face Sheet : ~ 7 mm - Lightweight Design & Fabrication

A gimbal housing is a component that stabilizes and rotates the seeker of a guided weapon. It helps ensure the seeker can accurately aim at the target at all times, regardless of the guided weapon's movement.

The GCS is an all-in-one portable Ground Control System designed to command swarm UAVs in diverse field environments such as military operations or outdoor performance venues. Depending on the operator’s mission environment and purpose, three type options are offered: HardCase, Shelter, and Tablet. The HardCase GCS is optimized for outdoor operations, featuring a 1,000 cd/m² high-brightness touch monitor with anti-glare and anti-fingerprint (AG + AF) coatings for enhanced usability. Dual monitors are equipped as standard for multi-UAV control, with the option to expand to additional displays. It integrates a high-capacity internal battery, 220 VAC power output, real-time system monitoring, and an automatic cooling system, enabling stable operation without additional setup in any environment. Furthermore, multiple interface ports—including USB, USB-C, and HDMI—provide broad compatibility with diverse devices.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Cooled thermal imaging camera module F/#4.0 • Detector type: Cooled InSb 15μm (640 x 512) • NETD: <20mk typical (without lens) • Continuous ZOOM LENS • Continuous Digital Zoom • Advanced image processing - Auto Gain Control (AGC) ) - Adaptive Histogram Equalization (Adaptive HEQ) - Local Area Enhancement (LAE) - Digital Detail Enhancement (DDE) - Denoise Reduction (DNR) - Sharpness • MTTF (Mean Time To Failure) 15,000 hours • Various color sets (WhiteHot / Rainbow / Twilight / TwilightShifted / Turbo / Iron / Plasma)

Honeywell 360 Display for Aviation The aviation version of the display is a wearable visor that uses augmented reality to provide civilian or military pilots with a high-resolution 360-degree view that seamlessly matches the view outside the cockpit. It also provides traffic callouts and flight instrumentation in the pilot’s field of view, which makes the Honeywell 360 Display ideal for flying at night, in bad weather or in congested airspace. The display improves safety, pilot confidence and aircraft utility. Honeywell 360 Display for Rugged Ground Vehicles Operators of ruggedized vehicles can use the display to safely maneuver in low visibility or hazardous conditions. It improves overall situational awareness, reaction speed and survivability by increasing visibility and reducing the need to consult instruments in the vehicle. The lightweight head-worn display uses real-time outside high-resolution camera feeds to create a seamless mixed-reality view and provides operators sensor information within their immediate field of view.

SamTra International was established as a privately owned trading company in Seoul Korea on March 17, 1995, specialized in selling various type of special cables, connectors and cable assemblies for high reliable, high life time & mission-critical applications, and recently in supplying high performance electro-mechanical & optical components, such as air moving low noise level fans & blowers, and brushless motors and DC torque motors, actuators, slip rings, rotary joints, optical transceivers and ethernet switches for optical network communication in aero-mil applications.