Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.

Small wind power systems and component components Durability technologies: Composites - nacelle, blades, corrosion protection Stability technology: and wind speed control (electrical) + tail folding (mechanical) High-efficiency system: Direct-drive PMSG - slotless, blades, coefficient of power (Cp): 0.429 MPPT (Maximum Power Point Tracker) : Maximum power following control Web monitoring: Real-time monitoring Easy to maintain and install Quality Assurance: More than 3 years System certification: New and renewable energy facility certification, new product (NEP), excellent product designation by the Public Procurement Service - Korea's first Element parts certification: generator, inverter-CE, blade static load test, demonstration test completed Annual average wind speed of 4.5m/s or more

The NSP-8 is IMSAR’s most powerful radar. It is capable of advanced Synthetic Aperture Radar (SAR), Moving Target Indication (MTI), and Magnitude Change Detection (MCD). When paired with an airborne server, it can even produce SAR Motion Video (SMV). IMSAR adds value to its exceptional engineering with a production time much faster than industry standard. The NSP-8 is designed for durability and thoroughly tested with a Mean Time Before Failure (MTBF) of over 2,000 hours. Additionally, it’s weatherized for optimal performance over land and sea. With this sensor, IMSAR’s users can understand the bigger picture.

The SDT F 16 Combat Training Pod is mounted on F-16 and similar air platforms in an external pod, and ensures efficiency in exercises and in the provision of air-to-air and air-to-ground tactics training to pilots. SDT F - 16 Combat Training Pod features advanced air-to-air and air-to-ground combat training capabilities, such as real-time autonomous position generation, weapon simulation and real-time hit/miss notification, thanks to its long-range and high-speed RF data link and integrated processors. The system has mission planning, live monitoring, debriefing and analysis/evaluation features. The SDT F 16 Combat Training Pod enables training in real flight conditions and in multi-threat/target environments. Its high-speed data link and modular design mean that the System is also a Live-Virtual-Constructive (LVC) training infrastructure.

The Fuel Heater is engine-mounted with fluid connections to both the engine fuel supply system and the engine lube oil system. The heater provides fuel heating for fuel de-icing, using engine lube oil flow during aircraft cold start and cold operation periods. REPAIR PROGRAM • Triumph has the expertise only the OEM can offer • OEM repairs are more dependable, increase MTBF and cost less long-term • Repair price is all inclusive • TAT 45 days approx

Giraffe 1X is an ideal air surveillance component in the Ground Based Air Defence (GBAD) domain that provides ground based air defence commanders with engagement quality target data, drone detection and Counter-Artillery, Rocket and Mortar (C-RAM) sense and warn within a single solution. It is the ideal main sensor for a Very Short Range Radar (VSHORAD) system and can be used as a gap filler that complements larger GBAD systems, or as a Counter-UAS (C-UAS) solution.

The EL2000 is an LTE femtocell developed for indoor use, providing seamless LTE service in environments such as homes or offices.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.