A lightweight high tensile aluminium frame, suspended by elastomeric anti-vibration mounts, provides superior ‘sway-space’ between the frame and the outer container and is the best possible way to safeguard delicate equipmentMore robust and stainless steel variants are custom-made for heavy payloads and corrosive environments. Enhanced ‘sway space’ between inner frame and outer case to prevent contact with outer container All our 19 inch Amazon Racks have a ‘user adjustable’ inner frame allowing back to front movement of 50mm within the outer container to accommodate front panel and rear wiring/ connector needs. Optional ‘EasyGlide’ removable, self anchoring, internal frame system Standard, stainless steel M6 threaded fasteners secure electronic equipment into floating stainless steel cage nuts at both front and rear of frame. All our 19 inch Amazon Racks have positive stacking, aligning at the front face regardless of rack depth

Custom Technical Elastomeric Solutions

The Signaty V IR Helmet Strobe is a Korean-made Identification Friend or Foe (IFF) device that supports IR and four LED colors (red, green, blue, white), ensuring visibility up to 5 km. It features short-range communication (CDS) for automatic synchronization among multiple units, along with SOS, auto-sync, one-hand operation, and vibration feedback functions. Powered by a single AA battery, it operates for up to 130 hours. Built to MIL-STD-810G standards for drop, waterproof, and dustproof protection, it delivers proven durability. Certified with KC and backed by domestic service, it is reliable for military, police, and firefighting operations.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Spring probes provide reliable electro-mechanical performance through hundreds of thousands of cycles. They are available in a variety of sizes, spring forces and terminations. Smiths Interconnect compression mount connectors utilizing spring probe technology offer tremendous advantages in reliability, performance and efficiency in comparison to conventional technologies like stamped metal, wire mesh, pin-and-socket or elastomer. Standard spring probes offering includes battery contact and connector probes designed to optimize contact performance in high-reliability, multiple-cycle interconnect applications.

• Band Width : L1/L5 or L1/L2 • Supported GNSS Constellations : GPS/Galileo/NavIC/GLONASS/BeiDou • Interference resistance : - Single jammer interference resistance up to 90 dB(J/S) - Multiple jammers interference resistance up to 82 dB(J/S) - Support of up to 3 jammers simultaneously for each of frequency bands • Interfaces : Digital output • Power Consumption : Low power consumption

Slightly smaller than the DCL120, the Model DCL110 red dot sight is designed and developed for the mid-size machine guns including armored vehicles, tanks and helicopters. Its wide lens (85x55mm) allows operators to have fast target acquisition and transition with both eyes open and make them easier to track moving targets from a natural firing position. Ballistic drop compensation ensures the red dot reticle is always on the target for the first round accuracy. Unique Features icon3Integrated recoil compensator retains sight picture on fast moving targets icon3Adapted a wide lens (85x55mm) makes easier to track moving targets. icon3Suitable for platform mounted weapons on armored vehicles, helicopters and boats icon3Compatible with night vision device icon3Different trajectory compensator per NATO 12.7 mm, NATO 7.62 mm and Cannon NATO 20

Instead of relying on limited data center infrastructure or building from the ground up, AWS Modular Data Center delivers a cost-effective, self-contained modular data center solution that supports customers’ data center scale workloads. With this offering, defense customers can securely store, analyze, and interpret petabytes worth of data in real-time to gain military advantage in the most isolated environments.