The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.

The personal pocket-sized ISR capability allows imediate situational awareness for soldiers executing dismounted operations globally. The system provides real-time live motion video back to the operator and the opportunity to take snapshots during missions.

Slice6 AIR, Slice6 Air BR 는 극한 시험 환경에서 아날로그 신호를 정밀하게 측정할 수 있도록 설계된 통합 데이터 수집 장비로, 크기, 무게, 전력(SWaP)에 최적화되어 제한된 공간과 질량 조건에서도 효과적으로 운용할 수 있습니다. 각 모듈은 마이크로프로세서, 이더넷 스위치, 신호 조정 회로, 비휘발성 메모리를 포함하고 있습니다. 독립형, 네트워크형, 기존 시스템 통합형 등 다양한 운용 방식에 대응하며, IRIG 포맷 기반 실시간 스트리밍과 이중 저장 기능을 통해 실시간 모니터링과 백업을 동시에 수행할 수 있습니다. Ethernet-based data acquisition unit (DAU) for flight test and ground shock test. SLICE6 AIR, SLICE6 AIR BR is a complete data acquisition unit for measuring analog signals in extreme test environments. Optimized for size, weight, and power (SWaP), SLICE6 AIR is ideal for applications with tight size and mass constraints. Each module features a microprocessor, Ethernet switch, signal conditioning, and non-volatile memory. The versatile SLICE6 AIR can be used standalone, networked for high channel count tests, or integrated into existing Ethernet-based flight test instrumentation. Real-time streaming in IRIG formats and dual store-in-place recording enables both real-time monitoring and redundant back-up of data on a single device.

Phased Array Multi Function Antenna including Radome

Slim, ergonomic full coverage vest Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for MV Assaulter's Zip-On Back Panels Increased structural integrity and reduced rear deformation Compatible with our entire accessories line Soft armor included Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

SAR Radar Antenna Assembly Module Telecommunication Radar Antenna Assembly Module

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

Stay in touch with ASI. Enter your e-mail and subscribe to our newsletter. Email Full Name Once signed up, you will begin receiving our newsletter. We will not sell or distribute your email address to any third party at any time.*After clicking subscribe you will receive a confirmation email.