Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30x2 transmits two independent sets of Base, Medium, or Full configuration Camera Link video signals (supporting up to 10 Taps per set) to a PC frame grabber. Each transmission layer can be configured independently .

The specifications for vessel design, manufacture and inspection comply with the ASME standard of the USA, as well as the standard of the Korea Gas Safety Corporation. These vessels are manufactured and exported to countries all over the world.

Liquid Measurement System (LMS) capacitance AC and DC fuel gauging probes use lightweight and durable carbon composite materials. In addition to being some of the lightest fuel probes in the industry, they are also virtually immune to corrosion, cracking, dents, and extreme field conditions. Our capacitance probes are inherently crash resistance by collapsing onto itself during hard impact landings to avoid tank penetration and fuel leaks. All electrical connections on the probe are bonded, and there is no friction or riveted electrical connections.

With durable constructions, GORE-FLIGHT Microwave Assemblies provide reliable performance for critical aircraft systems. To improve signal integrity and reduce interference, they incorporate shielding that meets and even exceeds the 90 dB requirement. A consistent impedance of 50 ± 1 ohms ensures a lower insertion loss and more reliable VSWR than leading competitors, both before and after installation. GORE-FLIGHT Microwave Assemblies also deliver the following benefits: Durability for the Life of the System Cost-Saving Performance

A comprehensive line of products in C, X, Ku, Ka and Q-band for SATCOM and 5G&6G are available as off-the-shelf items or custom-made design upon request. These products are specialized in various types of mobility environment including airborne application. We serve the customers in more than 20 countries with fully field proven products. The new era of wireless communication requires a converged solution of SATCOM and 5G&6G in the aspects of technologies and services. XMW is preparing for the new era with the solutions inherited from SATCOM and 5G&6G business for more than a decade.

The Ku-band Amplifier Module is a low-power amplifier designed to amplify the LO (Local Oscillator) frequency in the Ku-band. It provides a gain of at least 17 dB and an output level of 13 dBm or higher. The module includes a built-in monitoring function for output signal detection.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

For UAVs requiring both high-accuracy positioning and robust communication, Harxon’s compact, multifunctional helix antennas, such as the HX-CUX005A and HX-CUX618A, provide an integrated solution. Combining GNSS, WiFi, and Bluetooth antennas, these models deliver centimeter-level positioning alongside reliable data transmission across 2.4GHz, 5.8GHz, and 7.2GHz bands. The advanced inter-system design ensures exceptional signal clarity by effectively minimizing mutual interference, making them ideal for demanding UAV applications.