Weibel’s Doppler 3D tracking radars are designed for precise measurements of free-flying objects such as projectiles, artillery rounds, and rockets. The systems are highly effective for detailed debris tracking, range safety tests, missile tests, and space launches. Weibel’s tracking radars are phased array X-band CW, MFCW and FMCW radar systems consisting of state of the art phased array Doppler radar antennas, high performance pedestals, real-time multi-object tracking processors and state of the art waveform generators, all controlled from the operator console.

The D56M differential pressure switch provides high precision measurement across a wide range of low-differential pressure conditions in a package smaller than other units of comparable capability. The membrane senses changes between the “high” and “low” pressure inlets while offering excellent repeatability and high cycle life. Optional hermetically sealed contacts mean the D56M can be well suited when vapor ignition is a concern.

Typical uses include airflow control plenums.

For a similar switch with a higher resistance to shock and vibration, refer to the D16M

For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Environmentally sealed with optional hermetically sealed contacts
Proven diaphragm and leaf spring technology for high cycle life

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Raptor-F is dual-wave, helmet-mounted solution delivers unmatched situational awareness capability in any light conditions of the battlefield Raptor-F has a Fusion Technology combining Image Intensified Tube and Thermal Imaging to have superior abilities to detect, engage and neutralize threat in the harsh battlefield earlier than opponents.

Ultisense™ is Safran Vectronix’s line of high-performance OEM sensing modules, including ultra-compact Laser Rangefinders (LRF) and Digital Magnetic Compasses (DMC). Designed for seamless integration into military and civilian systems, they offer exceptional accuracy, ruggedness, and Swiss precision. LRF modules measure distances up to 30 km with ±1 m accuracy, while DMC modules provide azimuth accuracy down to 0.25°, even under extreme shock and environmental conditions.

The PNT500 is a rugged 3U VPX Assured Position Navigation and Timing(A-PNT) module aligned with the SOSA profile, offering multi-constellation QinetiQ Q40 GNSS, PTP Grandmaster timing, OCXO/CSAC fallback, and ruggedized reliability. • QinetiQ Q40 multi-GNSS receiver with anti-jamming/spoofing • IEEE 1588 PTP Grandmaster; OCXO or CSAC timing fallback, 1 PPS and reference outputs • Rugged single-slot 3U VPX, SOSA-aligned

Orbit’s TT&C ground stations antenna must function flawlessly in order to provide a narrow beam width link in one-time single opportunity, flight test event. Add this factor to the turbulent weather that is often present at the ground station locations, and you are looking at a formidable hurdle. Orbit provides fixed, transportable, and portable antenna systems that feature auto-track, RSSI-track and GPS track tracking modes, unsurpassed tracking accuracy and durability to deliver the stable connection required for dependable data throughput. Our stabilized T&T antenna systems work in extreme temperature conditions (-40°C to 55°C) and in rough weather, for example, at base stations that are close to the ocean or on high mountain ranges.

An optimized Plasma FIB-SEM platform with proprietary gas chemistries for high-quality delayering of the most current semiconductor devices