It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

It is a hybrid-powered(Engine + Generator) multicopter system that significantly overcomes the limitations of short flight times typically associated with battery-powered drones. It can carry up to 10 kg of mission equipment and perform operations for up to 2 hours, with the capability to autonomously land on moving vehicles and naval vessels. Its versatility is further enhanced through the development of various mission equipment, making it suitable for multipurpose applications.

Original compact design and long-term production know-how. System reliability and overall competitiveness.

Rolatube IAM (Integrated Antenna Mast) is a lightweight, man-portable communications mast that integrates a high-efficiency dipole antenna directly into its structure—redefining rapid tactical deployment. Built from Rolatube’s proprietary bistable composite, the IAM unrolls to full height without tools, enabling users to connect and transmit in seconds. Available in 3.5 m and 7 m models, the mast weighs just 1.9 kg and packs down to a 150 mm roll, offering unmatched portability for dismounted operations. Designed for reliable RF performance, the IAM ensures no signal loss when in contact with grounded surfaces. Its embedded omni-directional dipole antenna delivers superior range and VOR communication performance compared to traditional systems. The 3.5 m IAM comes in VHF (30–300 MHz) and UHF (136–470 MHz) variants, each available in four colours, with a top-cap socket for L-Band antenna integration, extending the system’s use to applications such as telemetry, GPS, and aircraft surveillance. The mast can be handheld, guyed, or elevated via an integrated rigging point, and is engineered to meet MIL-STD-810G, fully maintenance-free, and resistant to water, dust, and UV. With a wind rating of 100 km/h (62 mph) when guyed, the IAM stands up to demanding field environments while delivering high-performance, elevated communications infrastructure at the tactical edge.

An Angle of Attack (AOA) indicator is a flight instrument that shows a pilot the angle between the aircraft's wing and the oncoming air, providing a crucial safety margin by warning of an approaching aerodynamic stall. Unlike airspeed. A Vertical Speed Indicator (VSI), also known as a Rate of Climb and Descent Indicator (RCDI) is an instrument which indicates the rate of climb or descent of an aircraft. These devices are installed and compatible with F-16 series aircraft and KAI's T-50/FA-50 series aircraft.

Miniaturization model for UAVs Minimized Vibration & Noise by our technique Provide an electronic board Customized item for Military's needs

Honeywell 360 Display for Aviation The aviation version of the display is a wearable visor that uses augmented reality to provide civilian or military pilots with a high-resolution 360-degree view that seamlessly matches the view outside the cockpit. It also provides traffic callouts and flight instrumentation in the pilot’s field of view, which makes the Honeywell 360 Display ideal for flying at night, in bad weather or in congested airspace. The display improves safety, pilot confidence and aircraft utility. Honeywell 360 Display for Rugged Ground Vehicles Operators of ruggedized vehicles can use the display to safely maneuver in low visibility or hazardous conditions. It improves overall situational awareness, reaction speed and survivability by increasing visibility and reducing the need to consult instruments in the vehicle. The lightweight head-worn display uses real-time outside high-resolution camera feeds to create a seamless mixed-reality view and provides operators sensor information within their immediate field of view.