JEFF WRAITH II is the tactical goggle for Military & Law Enforcement. The lightweight goggles give you wide protective coverage with a comfortable fit for use. It is compliant with ANSI Z87.1 standard requirement, European CE standard, and exceed U.S. Military eyewear ballistic resistance requirement MIL-PRF 32432A, MIL-DTL-43511D. The Anti-Scratch & Anti-Fog coated polycarbonate lenses give you up to 99.9 protections form UV rays and you can wear the goggle with your glasses on.

3U OpenVPX SSD is a rugged, reliable, high-performance NVMe SSD solution. Since the 3U OpenVPX SSD is a NAND flash-based SSD, reliability is improved in environments with vibration and contaminants compared to existing hard disk drives (HDDs). Additionally, it has the advantage of low latency and high-speed data transfer speed through the NVMe interface based on PCI Express. This is a significant advantage in high-risk combat environments.

High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

SAIT CIRUS has been fortunate to receive generous funding from the Canada Foundation for Innovation (CFI), Natural Sciences and Engineering Research Council of Canada (NSERC), and Prairies Canada to support the development of our research centre and supporting applied research projects. Our research centre features a diverse and advanced fleet of remotely piloted aircraft, sensors, survey equipment, data processing and modeling software, and hardware. Some of our remotely piloted systems are the only ones in North America, making CIRUS a leading research centre on the continent.

The mRO-50 Ruggedized is a breakthrough microwave optical double resonance (MODR) low SWaP-C Miniaturized Rubidium Oscillator designed to meet the latest commercial, military and aerospace requirements where time stability and power consumption are critical. It provides a one day holdover below 1µs and a retrace below 1E-10 in a form factor (50.8 x 50.8 x 20mm) that takes up only 51 cc of volume (about one-third of the volume compared to standard rubidiums) and consumes only 0.36W of power, which is about ten times less than existing solutions with similar capabilities. The mRO-50 Ruggedized Oscillator provides accurate frequency and precise time synchronization to mobile applications, such as military radio-pack systems in GNSS-degraded or denied environments. Its wide-ranging operating temperature of -40° to +80°C is also ideal for: Underwater Applications, Military Communications, Radars, Low Earth Orbit, Electronic Warfare, Airbornes & Avionics, UAV/UGV/USV/UUV

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m  In cases where a single PC cannot handle large amounts of image data, it becomes necessary to duplicate the image and use multiple PCs for processing. A splitter is required in such scenarios.  The CLS-30T2S amplifies and transmits image signals from a single camera to up to two PCs, supporting Base/Medium/Full configurations (10 Taps supported).  The Master side transmits RS232 and CC1~4 signals, while the Slave side replicates and transmits image signals only.

12kW DBC HEL Source for C-UAS

Delivering dinner to your door. Bringing medical supplies to hospitals. Surveying waters where someone is missing. Drones are starting to help make many tasks faster and life a little easier. One hitch in using drones is that, in most cases, regulators in many countries require that a human keep them in sight at all times.