Saab's Electronic Warfare (EW) Countermeasure Dispensing Systems (CMDS) for airborne platforms provides self-protection in sophisticated, diverse and dense threat environments for your mission success and safe returns.

The 200W High Power Amplifier is an L-band amplifier that delivers 200W output with a 60% duty cycle. It provides a gain of over 53 dB, with output flatness of 2 dB depending on the input signal level. At maximum output, it offers ACLR performance of -20 dBc. With a built-in output-stage bandpass filter (BPF), it achieves excellent harmonic suppression of -70 dBc. Built-in monitoring functions include output signal and temperature monitoring.

The SC-HPCRTM is a Rear Transition Module (RTM) designed to extend the I/O functionality of the HPC2812 high-performance computing board. It can be mounted on the rear side of the VPX backplane to enhance system connectivity and I/O flexibility. Since the HPC2812 board consists of two computing nodes, the SC-HPCRTM provides dedicated interfaces for each node, including Ethernet, USB, MMCX, and Mini-HDMI ports, ensuring optimal data communication and display output performance in mission-critical embedded systems.

Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

The EXOpod is the most advanced cubesat deployment system on the market. It is available in 6U/8U, 12U and 16U sizes which can be broken down into smaller slots to accommodate cubesats of any size. EXOpod Nova, the latest generation of the EXOpod line, is rapidly expanding what the cubesat design standard (CDS) is capable of – cubesats launching with Nova can now increase the volume of their lateral protrusions by 400% and their mass by 30%, enabling a wider and more powerful array of satellite designs and use cases.

For : Elevator Assembly Tool A320 Project 3.5m (L) x 1.5m (W) x 2m (H )

A reliable, quality full or semi-auto version of the rifle that has written entire volumes in history. A basic, non-nonsense version that stays true to the original.