Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

Input : 24Vdc Output : 270Vdc N+1 System

Your Benefits: Stunning Image Quality SWaP-Optimized, Smallest Shape, IP69K Protection Ultra-Low Latency G2G (Glass-to-Glass) Frame Rate: 60 Hz Increased Optical Resolution 2.1 MP, 1920 x 1080 Dynamic Range: 120 dB Integrated Heater for De-Icing / De-Misting FoV 53°, Alternatives tbd

Leveraging industry’s leading MEMS technology to provide previously unheard of capabilities in angle random walk values (0.02°/√hr.) without loss of tactical grade levels across military environments, including 1°/hr. bias stability, the SDI500 is designed to achieve the demanding performance levels required in sophisticated systems applications. It is particularly suited for use by Integrators and OEMs, packaged in a highly miniaturized, cylindrical configuration with a volume of only 19 cubic inches. Boasting a 20-Year lifetime capability without requiring calibration and a MTBF of more than 100,000 hours, multiple output data formats and SDLC, RS232 and UART output interfaces are provided in this revolutionary IMU for optimized systems protocols.

DeTect specializes in advanced radar and other sensor technologies. The company is the leader in bird radar technologies for real-time aircraft bird strike avoidance, and industrial bird control with over 1100 of its MERLIN bird radars delivered to the US, Canada, Europe, Africa and Asia. DeTect’s MERLIN Bird Detection Radar (BDR) system, introduced in 2003, is the first production model bird strike radar system and is the most advanced and widely used technology available for aircraft-bird strike risk management providing for real-time detection, tracking and alerting of hazardous bird and drone activity at commercial airports, military airfields, and military training and bombing ranges. The bird radar is proven, operational technology with systems installed worldwide for aviation safety and environmental applications. The radar has a documented record in reducing bird strikes, increasing safety, and reducing aircraft damage at both military and commercial airfields MERLIN is also the only bird radar system to have been evaluated and certified for real-time, tactical flight safety use by the US government (NASA and the US Air Force) and is the only bird radar approved for and in use at a commercial airport control tower under national flight safety standards. The system is a full True3D™ radar and has the highest update rate of any BDR system (4+ times per second). MERLIN can optionally be delivered as a dual-function bird and drone detection radar (BDR-DDR), risk alerting and interdiction system. The counter-UAS DDR upgrade can be added to a MERLIN BDR at any time as an upgrade that includes the drone classification software and radiofrequency (RF) detectors to detect RF and WiFi controlled drones and locate their operators

Green Optics possess proprietary CVD-based Zinc Sulfide (ZnS) production technology for defense and industrial multi-wavelength optical materials. We have core technological capabilities to manufacture high-quality ZnS products tailored to meet diverse customer requirements. ZnS Material Optical Performance and Processing ZnS materials produced through CVD processes provide high transmittance exceeding 70% in the SWIR wavelength range (8-12 μm). When these materials undergo additional Hot Isostatic Pressing (HIP) treatment, the crystal structure undergoes recrystallization, improving transmission characteristics to achieve over 70% transmittance in the visible (VIS) wavelength range of 0.45-0.8 μm. This process extends the application range of optical materials previously limited to SWIR and LWIR bands, delivering superior optical performance across multi-wavelength regions from VIS to LWIR. Material Specifications: - STD-ZnS (Standard ZnS Material): Manufactured via CVD process, exhibits transmittance exceeding 70% in LWIR wavelengths (8-12 μm) with high physical hardness (Knoop hardness: 210 kgf/mm²). - MS-ZnS (Multispectral ZnS): Converted from STD-ZnS through HIP processing, extends wavelength range into the visible spectrum. While crystal structure recrystallization during this process reduces hardness somewhat (approximately 150 kgf/mm²), it still meets MIL specifications. This dual-processing approach enables comprehensive wavelength coverage while maintaining military-grade durability standards.

Air conditioning units are designed for efficiency, durability, and environmental control, our units help ensure smooth ground handling and turnaround operations in all weather conditions Whether servicing commercial planes or private jets, our units deliver powerful and precise cooling and heating to ensure comfort for passengers and crew.