TMM-238 is developed and designed for use in operator display for Militray systems. It has 1920 x 1080 pixels visible resolution, which is designed and tailored for use in operator display for Militray systems • 23.8”Inch display, 16:9 / 1920 x 1080 Resolution • HDMI, DP, RGB, input • Full Range Digital Dimming Control • 6 Key Membrane Switch • Power range : DC 24V Input • LCD PANEL backlight unit : LCD Backlight units

GAIN CRITICAL CLARITY WITH SATELLITE TASKING Task ICEYE SAR satellites to access groundbreaking data on any location on Earth – day or night and in any weather. The process is simple and images are usually delivered within 24 to 48 hours of your initial request. ORDERING SAR DATA – MADE SIMPLE We believe access to reliable and timely SAR Earth observation data should be available to all, so we provide access options designed to meet your specific mission needs and collection timeframes. The process begins with defining your area of interest, revisit frequency and other parameters. The first images are usually acquired, downlinked, decoded and processed within 24 hours of the initial request and delivered within 8 hours after that.

i3system’s line scanning X-ray detector platform, XID-C15DP/XID-C24DC, is a high performance and cost effective solution for dental panoramic, cephalometric applications. i3system’s direct type sensor ensures the most sharp images among the current products in the market. XID series is designed for compact size and easy installation. High DQE(Direct Quant㎛ Efficiency) enables high performance at lower dose of X-ray. Introduction Indirect type X-ray detector uses the scintillator and the photo-diode(CCD or CMOS sensor) for conversion of the X-ray into the light and for taking images espectively. But the light scatters and goes extinct during it passes through the scintillator and reaches to the CCD or CMOS sensor. As a result, it is inevitable to get blurred image. In the mean time, XID C15DP, direct type detector, converts X-rays into electronic signals directly without conversion process of light. Because X-ray is not converted into light, it provides much sharper images than indirect type detector. XID C15DP is designed to compact for easy installation. It provides Gigabit Ethernet port on the detector for easy configuration. Instead of Gigabit Ethernet, camera link or optical interface can be provided according to requirements of users.

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

The intelligent operations you didn't know existed - and didn't know you needed. Let data be your co-pilot with Honeywell Forge industrial-grade software.Fol...

Kia newly developed 2½ ton Medium Cargo Truck to fit all- battlefield environments with the best driving performance and durability and survivability based on its long-accumulated military and commercial vehicles technology. 280 – HP Diesel Engine Mounting commercial high-efficiency and high-hoursepower engines onto behicles for tracking capability, cold starting, and electromagnetic wave shielding adequate for military applications Automatic transmission Improves the convenience of operating the vehicle, and prevents the engine from shutting down and the vehicle from slipping when it is started on a slope. All wheel drive (AWD) The all wheel drive function is applied for improving tracking and hauling power, steering capability and stability, and off-road driving power. Full air braking system and ABS Applying a full-air braking system to the vehicle for reducing the force required for pressing the pedal, and ensuring precise braging force. Applying ABS for keeping the braking force and steering capability intact and securing vehiclestability on anuneven surface. Air pressure control device of tire (optional) Evacuates from poor subsoil by controlling air pressure of tire inside the cabin Cabin This cab-over cabin provides improved legibility compared with bonnet-type. Applying specifications of commercial vehicles enhances convenience of driving vehicle Air conditioner Provides a pleasant environment to riders all the time and secures visibility of a driver by defrosting the windshield. Instruments and switches Commercial vehicle instruments for improved legibility, and switches ergonomically arranged for enhanced operability

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F