Low Insertion Loss, Good IMD Performance RF Coaxial Switches: SPST to SP8T Switches, Transfer Switches from DC to 200 GHz Power Dividers and Power Combiners Wilkinson Types from 2 to 16 Ways Frequency Range from 400 MHz to 26.5 GHz

Adjustable stator vanes that control airflow angle entering the rotor blades.

LightIR series key features: • High MTF performance • Extremely compact, light, configurations • Suitable for a wide range of low-SWaP applications • Maintains focus through the entire zoom range • Compatible with major MWIR and LWIR detectors • Designed to withstand harsh environmental conditions

From briefing to touchdown and beyond, Fpo gives crews fully actionable recommendations on the most cost-efficient way to complete their flights under the current conditions, carefully balancing operational considerations with passenger comfort and on-time performance. Fpo holistically optimizes all phases of flight from climb to descent, relying on high-fidelity and real-time data to deliver information that is accurate, relevant and complete. Always raising the bar, we have partnered with Nexteon Technologies to introduce a multi-dimensional optimization solution, FPO•SR, which combines vertical and lateral flight optimization capabilities.

Input : 24Vdc Output : 270Vdc N+1 System

We bring all our skills and expertise to bear in product development and in-service support in order to meet our customers' needs: 3D drawings and design Aeroelasticity Thermal, CFD analysis Static and dynamic analysis Electrical/hydraulic/mechanical system design Cost-optimized design, cost-benefit analysis Parametric experiment design Optimization techniques and algorithms Multiphysics modeling Concessions management: control plan, extension of concession, design engineering office, concession justification, impact analysis (FMECA, process/design change, etc.), definition of a repair program, updating of certifications Flight physics Configuration management Design, calculation and modeling Composite or metallic parts

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Proximity Device for target detection Optic Device for target detection