The Integrated Weather Observation System (IWOS®) is the compact, wireless, rugged weather station that can be customized to any customers’ specific needs. This system can replace legacy weather stations that require hardline power or extensive infrastructure for permanent installation. It integrates up to eight environmental sensing modules with optional satellite communication in a package that fits into a single case and weighs less than 25 lb. In addition to its portability, performance, and professional-grade construction, the modular design of the IWOS lends itself to higher accuracy, higher availability, and a lower lifecycle cost thanks to its easily replaceable and serviceable modules.

This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

Antimicrobial/FR treated padded spacer mesh system Low Profile Shoulder Harness Ultra-light multipurpose loading platform Applied 3 x 8 PALS system for the both cummerbund and 3 x 6 for the back panel 4 magazine pockets inside the cummerbund 2 pockets for 6"x6" hard plate inside the cummerbund Composition Material : 500D Cordura® + ARAMID / PV® Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

This fully self-contained pressure test and calibration system combines pressure generation, signal measurement, and loop power to deliver all the convenience of the Druck DPI 610/615, while being half the size, twice as accurate and easy to use. The DPI 611 is the fourth generation of the DPI 600 family, first introduced in 1984. The DPI 600 family revolutionized testing and calibration by providing all the tools for pressure generation and signal measurement in a stand-alone portable package. The DPI 600 soon became the flagship equipment of the industry and today it is simply known as "Druck". Built on a technical legacy and more than 30 years of experience in pressure measurement and calibration, the DPI 611 offers all the convenience and reliability of a true "Druck", while delivering double the performance of a product half its size.

KNF offers high qualified Aluminium products used in a wide range of markets around the world. *No.1 Stockholding & Qualified Aluminium Supplier *A1XXX/A2XXX/A3XXX/A5XXX/A6XXX/A7XXX Series and more *Business Areas: Aerospace & Defense / Semiconductor & Display / Marine & Silo / Automotive & EV Battery / Others

APA-110 is designed to eliminate CO2 emissions with its unique technical characteristics. It can perform the complete service of aircraft at remote parking places with diesel engine and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location.

This EGR-Cooler prototype, developed in collaboration with Hyundai Motor Company, was fabricated using EOS Stainless Steel 316L, renowned for its excellent corrosion resistance and mechanical properties in demanding automotive applications. The part was additively manufactured over a period of 64 hours, demonstrating the advanced capabilities of metal 3D printing for precision and reliability. Unlike conventional designs, this innovative component integrates 14 separate parts into a single, unified structure, greatly simplifying assembly while enhancing operational efficiency. The implementation of a Triply Periodic Minimal Surface (TPMS) structure within the cooler significantly improves heat exchange performance and enables substantial weight reduction, meeting next-generation thermal management requirements. Partners Lab stands as a leader in Korean additive manufacturing technology, offering cutting-edge capabilities in OEM production and collaborative technical development for various industrial sectors. This EGR-Cooler, designed by nTopology, exemplifies our engineering expertise and commitment to delivering high-performance thermal products for automotive and beyond.