To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

QPL certification is a system in which the US government guarantees the quality only for products that have passed strict local company inspections made of 150 tests and verifications under the supervision of the US government. Yeonhab Precision obtained the certification in Asia for the first time after 10 years of application. In particular, with the successful QPL registration for the first time in Asia, Yeonhab Precision is the first and only company in Asia which got the qualification of marking “MS” with the title of “Korea’s first MIL-DTL connector”. We will provide customers with the best products as we have the sense of the pride of developing the QPL certified connector with our own technology in Korea.

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

Gas-to-liquid heat exchangers, also known as air-to-water or water-to-air heat exchangers, are critical in high-performance environments where efficient thermal management determines reliability and output. They are widely used in applications such as engine charge air cooling, exhaust gas heat recovery, avionics thermal control, cryogenic fluid conditioning, and high-temperature gas handling.

YOUR BRAND IS A DESTINATION Halfway around the world, surrounded by competitors, with market share on the line and the clock ticking on annual sales targets — this is no time to circle your wagons. Instead, turn heads with a custom-built exhibit from Kallman Creative Services, and take pride in owning an event destination that’ll stop visitors in their tracks and jumpstart those sales conversations. FROM CONCEPT TO SHOW FLOOR Who would have thought that on a bare concrete floor, in an anonymous exhibit hall, thousands of miles from your office, you could feel so at home? That’s what Kallman Creative Services does for you. We’re one of the most experienced custom builders in the trade, with over 350 clients and thousands of stands under our belts, because we know how to transform any raw space into a showpiece that works for your business. From the first concept to the last detail, whether you’re buying an in-line booth or a stand-alone hospitality chalet, our approach is simple: we’re hands-on partners and honest collaborators who listen, design and build to your specifications — on strategy, on time, on budget. The bottom line is: When you arrive on site, you know it’s right. RESEARCH Our team is constantly working to utilize the newest trends in design and technology. DESIGN & CONSTRUCTION We'll help you build your booth from the ground up. SHOW SPECIFICATIONS We follow trade show rules and regulations to ensure you custom booth design meets all specifications. SHIPPING ASSISTANCE Our shipping partners and on-site team will make sure your shipments make it to your booth. GRAPHICS We receive the graphis you produce and ensure they are printed in the highest quality so your booth is set for success. AUDIO/VISUAL From flat screens to microphones, whatever you need, we can source. SET-UP & TEAR-DOWN Arrive on-site to a completed build and leave the clean-up to us! ON-SITE PROJECT MANAGEMENT We are at your event to provide on-site project management and take care of any last minute needs. UTILITY REQUIREMENTS Power, water or compressed air - whatever you need, we'll take care of it.

This pouch is designed to store mission-essential equipment during operations. It provides efficient storage for magazines, IFAKs, radios, and other critical gear. Hesed Korea’s tactical pouches are constructed from durable 500D Cordura fabric and feature modular compatibility for attachment to plate carriers.

I'd like to introduce is the “Lightweight 105 Self-propelled Howitzer,” which is unveiled in 2024. This model is mounted on the small tactical vehicle, showcasing the strong collaboration within Hyundai Motor Group. This product is applying 105mm artillery and can also be utilized on the battlefield with a command vehicle, firing vehicle, and ammunition carrier. This system is optimized for "Shoot & Scoot" tactics, as each vehicle weighs less than 7 tons and can be airlifted by tandem rotor helicopters like the CH-47 Chinook. The number of the crew has been reduced from six to four, which enhances its mobility and efficiency. It boasts a maximum firing rate of 10 rounds per minute and a range of 14.7 kilometers. This Lightweight 105mm Self-propelled Howitzer was completed firing test and currently in the final stages of developing with the government agency. I am looking forward to manufacturing mass production in 2026.

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector