The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

Developed as Korea’s first hydrogen-and-battery hybrid propulsion system, this next-generation eco-friendly aircraft uses electric batteries for take-off and hydrogen fuel cells for cruise flight, achieving a new standard in sustainable aviation. Recognized as a world-first intellectual property, this model also became the first hydrogen hybrid Advanced Air Mobility (AAM) aircraft in Korea to receive Special Airworthiness Certification from the Ministry of Land, Infrastructure and Transport in 2024.

JEFF WINDYGO is a high-performance product engineered for a variety of outdoor activities, including military and law enforcement. Designed to fit snugly against the user's face, these goggles offer full protection from flying debris without leaving any gaps. The lightweight, flexible silicone frame provides a comfortable, secure fit, while the impact-resistant polycarbonate lens ensures exceptional durability and clarity. And its superior flexibility allows it to conform comfortably to a variety of face shapes and sizes. Additionally, the goggles are crafted to deflect wind, thereby protecting the eyes and enhancing visibility. Compatible with various communication devices and helmets, JEFF WINDYGO is a versatile, user-friendly choice for professionals in the field.

Developed by MPS Microsystems, the voice-coil nano-positioner unites a Lorentz-force motor, flexure guidance and on-board electronics inside a 65 × 60 × 38 mm envelope. Standard travel is 2.88 mm, extendable to 7 mm with the same coil, suiting microscope objectives, small mirrors and sensors that demand friction-free motion. Bidirectional repeatability stays within ±1 µm over a 360 µm stroke and ±2.5 µm across the full stroke. We can tailor mounting plates, objective clamps and cable exits to suit your specific requirements, ensuring that this voice-voil actuator can be integrated seamlessly into your system.

Flight safety equipment that supports safe take-off and landing control of aircraft in the airport control area. Design and Manufacture - Antenna Housing - Driving Unit - Environmental Control Unit

GP division is producing Glass paper in the wet by glass fiber fabric as a main ingredient. Glass Paper has a dimensional stability, heat resistance, chemical resistance, electrical insulation, Print Processability, heat insultion and so on. Due to its advanced quality, the Glass Paper is used by many manufacturers globally for floorings, buildings, exterior electronics. Also, it is used for inorganic filter products, and diverse parts are under researching as its demands rise up.

Building on an unsurpassed legacy of success, GE continues to execute on bold technical initiatives to ensure even more demonstrable support to the warfighter and those in need of humanitarian relief.

Ultra-High Accuracy MEMS Motus features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Motus’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Motus is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. Miniature Package Never before has such high inertial performance been available in such a small package. Motus consumes just over 1 cubic inch in volume and weighs only 26 grams. This makes it ideal for weight and size sensitive applications. Motus is available in an OEM package suitable for integration into larger products or an enclosed package for external and standalone use. Advanced Signal Processing Motus samples its sensors synchronously at 1000Hz through six individual 24-bit differential ADCs which minimizes noise as well as providing optimal thermal calibration and performance characteristics. 14 separate heavily filtered regulated power supplies ensure that each sensor and ADC is operating off the cleanest possible power supply. Reliability Motus has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in mind. The hardware is designed and manufactured to mil standards. High Update Rate Motus outputs temperature calibrated sensor data at 1000Hz as well as filtered attitude at the same rate. This allows for control of dynamically unstable platforms.