INCOLOY® Alloy A-286 -Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH -Bars Material no. 1.4548.4 / 17-4 PH -Bars Material no. 1.4546.9 -Bars

Built with a rugged design and clear display, the TACNAV UMD offers: Highlights Active dot-matrix design, delivering unparalleled flexibility User-friendly interface with easy-to-read icons, messages, and pop-up menus Features Generation III NVG (night vision goggle)-compatible Four “soft keys” for easy operation Interchangeable with both Commander’s and Driver’s Displays, reducing logistics and cost Military standard approved for outstanding performance and reliability Ideal for integration into digital Battle Management Systems Compatible with all existing and future EMCORE TACNAV systems Applications Military vehicle requiring a user-friendly interface for its tactical navigation system The TACNAV UMD is controlled by the Arms Export Control Act (Title 22, USC Sec 2751 et seq.) and the International Traffic in Arms Regulations, ITAR 22 CFR 120-130, and may not be exported from the United States or disclosed to a foreign person in the United States except as authorized by those regulations.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

The SC-DSPRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the DSP282A. When the DSP282A board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-DSPRTM board into the back of the Backplane. The DSP282A board consists of two computing nodes. To support this, Ethernet, USB, MMCX, and mini-HDMI ports are allocated to each node, and synchronization signal input ports can also be used simultaneously on both nodes.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

EOTDS is designed for Assault Riffle with our LED illuminating reticle technology. This sight helps user getting the target distance with the bullet drop compensator and is easy to aim properly. It is designed to be utilized with both eyes, providing quick target acquisition and engagement when needed. EOTDS can be used for hunting/recreational purpose.

· Federated fire control enabled by the cutting-edge combat management system and sonar system · Unparalleled submerged endurance of more than three(3) weeks with high capacity of lithium-ion battery and a fuel cell-based AIP system · Multi-weapon integration for superior deterrence, including wire-guided heavy weight torpedo, anti-ship missile, SLCM, SLBM, and mobile mine · Enhanced stealth and survivability through no cavitation at all speed range, optimized hull form, and acoustic tile · Advanced automation features such as SNDC and IPMS, enabling a reduced crew size and improved habitability