Small wind power systems and component components Durability technologies: Composites - nacelle, blades, corrosion protection Stability technology: and wind speed control (electrical) + tail folding (mechanical) High-efficiency system: Direct-drive PMSG - slotless, blades, coefficient of power (Cp): 0.429 MPPT (Maximum Power Point Tracker) : Maximum power following control Web monitoring: Real-time monitoring Easy to maintain and install Quality Assurance: More than 3 years System certification: New and renewable energy facility certification, new product (NEP), excellent product designation by the Public Procurement Service - Korea's first Element parts certification: generator, inverter-CE, blade static load test, demonstration test completed Annual average wind speed of 4.5m/s or more

ALTERNATIVES TO: MS25271 / MS25395 / MS25267 / MS25269 / MS25273 / MS27418

Main Fuel Control, Servovalve, Switches, Indicators, Starter Generator, Power Unit, Gas Turbine, Control Unit, Ice Detector, Blade, Advanced Flight Control Computer, Manifold Assembly, Main Battery, Ring Bearing, Power Supply, Motor, Sensors

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

- Inspection robot control and damage assessment for robot operators. - Pre-inspection information creation for inspection planning. - A 3D user interface for inspection robot status monitoring. - Damage assessment and result report generation capabilities.

Main Fuel Control, Servovalve, Switches, Indicators, Starter Generator, Power Unit, Gas Turbine, Control Unit, Ice Detector, Blade, Advanced Flight Control Computer, Manifold Assembly, Main Battery, Ring Bearing, Power Supply, Motor, Sensors

# Key Features - Map Generation and No-Drive Zone Setting in Airports > Airport map/sensor fusion-based localization function > Function for defining main movement and standby areas > No-drive zone setting - Optimal Path Autonomous Driving Function > Destination-based optimal path navigation > Speed limit settings by path and area > Real-time location monitoring > Obstacle detection and immediate response > Driving on diverse road surfaces within designated areas - Real-Time Bird Detection and Bird Position/Direction Prediction > Real-time bird detection > Support for approximate bird position/direction prediction based on object detection algorithms > Updating of approximate bird position/direction prediction based on flock detection - Effective Bird Deterrence Reflecting Bird Characteristics > Playback of diverse (randomized) acoustic patterns - Real-Time Communication with Operator and Manual Control Function > Monitoring console (PC) provides real-time bird detection status and history > Display of approximate bird position/direction predictions on a map > Real-time video data sharing > Remote manual control - Smart Charging Function > Automatic return and charging when mission is complete or battery is low

For electrical and electronic signal connections inside and outside the hermetic equipment, it reliably protects the device from extreme temperature/humidity changes, vibration and physical/chemical effects, and transmits signals and currents without loss. These connectors use special glass or ceramic as insulation and are used in furnaces, power breakers, submarines, gas control systems, transformer safety devices, etc. Key features of closed connectors: It completely blocks the interior from the outside environment to keep it vacuumed or pressurized. Durability: It works reliably in extreme environments (high temperature, low temperature, humidity, chemicals, etc.). Electrical performance: It delivers electrical signals or power without loss.