STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The SC6G0 series supports 4K60 hardware compression and UVC video output, with power options via PoE or USB Bus Power. Its built-in SoC delivers 2.5 AI TOPS, enabling seamless YOLO AI tool integration. This design streamlines system setup and connectivity, boosting flexibility and deployment efficiency across diverse AV applications.

1. 용도 : 전자제어기로부터 공급되는 전력으로 빠르게 가열하는 장치 2. 기능 : 8,200 Kcal/hr(차체 특성에 따른 난방효율 최적화 설계, 운용간 안정성 확보) 3. 관련 장비/체계 분야 : 단거리지대공무기(천마) 4. 관심 협업 분야 / 목표시장(국가) - 전차ㆍ장갑차 그 밖의 전투기동장비 / 국내 방위산업시장 및 해외 (미국, 멕시코, 프랑스, 이스라엘, 인도네시아, 말레이시아, 아랍에미리트, 유엔국 등) 5. 기타사 - 영구자석 기반 발전기 기술 및 고효율 에너지변환 기술(특허보유) - 국방규격화 완료, 해외수출 경쟁력 제품

Suitable for critical military systems such as aerospace, defense, communications, and electronic warfare. Maintains performance under harsh conditions such as high and low temperatures, moisture, vibration, shock, and chemicals

TESCAN SOLARIS is a fully automated sample prep platform optimized for advanced devices with sub-10 nm features. It integrates the Triglav™ SEM, AutoTEM Pro™ software, and OptiLift™ nanomanipulator to enable hands-free, repeatable lamella prep in planar, inverted, or top-down geometries.

This fully self-contained pressure test and calibration system combines pressure generation, signal measurement, and loop power to deliver all the convenience of the Druck DPI 610/615, while being half the size, twice as accurate and easy to use. The DPI 611 is the fourth generation of the DPI 600 family, first introduced in 1984. The DPI 600 family revolutionized testing and calibration by providing all the tools for pressure generation and signal measurement in a stand-alone portable package. The DPI 600 soon became the flagship equipment of the industry and today it is simply known as "Druck". Built on a technical legacy and more than 30 years of experience in pressure measurement and calibration, the DPI 611 offers all the convenience and reliability of a true "Druck", while delivering double the performance of a product half its size.

The SBIR Training Program prepares business owners to write compelling SBIR/STTR grant applications with state-of-the-art proposal development workshops, structured mentoring, and follow-up guidance from proven business experts. SBIR (Small Business Innovation Research) and STTR (Small Business Technology Transfer) are highly competitive awards-based programs that finance small businesses hoping to commercialize their technology innovations.

Patria CANDL provides a single data link solution for communications requiring high reliability, such as UAS payload data and C2. It enables air-to-air and air-to-ground Ad Hoc Networking as well as relaying for BLOS capability, thus enabling capabilities such as MUMT - Manned UnManned Teaming and LVC – Live Virtual Constructive training. 8 Mbps data rate with additional safety features for C2, dynamic Ad Hoc Networking communication, motion video and digital voice capability are all integrated in one Software Defined Radio based compact airworthy terminal. Our CANDL covers NATO IV C-band as well as WRC 2012 defined civil UAS C2 frequency band in single housing enabling both military and civil UAS applications. Networking and range performance can be further extended with optional external HPA (High Power Amplifier) module. C2 & Payload Data Secure Command & Control for UAV platforms, payload and missiles Payload data (HD video, IR, SAR) for manned/unmanned platforms Distribution of situational awareness through networked data transfer for fighters Operation in GPS-denied environment Platform independent system (air, naval, ground) Legacy systems upgrade for enhanced performance Manned-Unmanned Teaming (MUMT) Force multiplier in hostile environment Multi-platfrom and swarming capability Mission distributed decision-making and co-ordination Optimisation of the role and performance of the platform on-the-fly Real-time communication through ad-hoc IP-network Live Virtual Constructive (LVC) Training Cost effectiveness utilising simulators and synthetic forces More demanding and easily scalable training scenarios Hiding warfighting tactics into secure digital environment Enabling complex training scenarios for manned and unmanned platforms Joint-networked, real-time communication between all Live, Virtual and Simulated assets