V-BAT Teams is powered by Hivemind, the world’s best AI pilot and the most strategic defense tech of our generation. AI pilots enable aircraft to maneuver without GPS or communications and enable the concept of intelligent teaming – the ability to autonomously read and react to each other, adversaries, and the environment to accomplish the mission.

KVPX+ Series is an embedded interconnect system that provides unrivaled performance in harsh environments while adapting to the VITA standard design requirements. KVPX+ Series is a shielded, high-density, high-speed, modular interconnect system optimized for differential pair architectures on a 1.8mm x 1.35mm grid.

Slightly smaller than the DCL120, the Model DCL110 red dot sight is designed and developed for the mid-size machine guns including armored vehicles, tanks and helicopters. Its wide lens (85x55mm) allows operators to have fast target acquisition and transition with both eyes open and make them easier to track moving targets from a natural firing position. Ballistic drop compensation ensures the red dot reticle is always on the target for the first round accuracy. Unique Features icon3Integrated recoil compensator retains sight picture on fast moving targets icon3Adapted a wide lens (85x55mm) makes easier to track moving targets. icon3Suitable for platform mounted weapons on armored vehicles, helicopters and boats icon3Compatible with night vision device icon3Different trajectory compensator per NATO 12.7 mm, NATO 7.62 mm and Cannon NATO 20

ELECTROMECHANICAL RELAYS

Teledyne FLIR's Tau 2 series offers 40 variants of the most reliable and rugged longwave infrared (LWIR) thermal camera module. Equipped with a simple optica...

Our transport drone is designed for efficient and reliable cargo delivery. With precise and stable flight performance, it supports real-time monitoring of delivery routes and environments through an advanced camera system, ensuring safe and timely operations.

This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.