- Reduced weight and manufacturing cost by more than 30% compared to conventional metallic propellant tanks - Designed and qualified to according KARI requirements - Proof & burst pressure application - Cyclic pressure(MEOP, Max. Enveloped Operating Pressure) application, more than 40 cycles

1. Machining • Small, medium, and long bed machining available, with sizes up to 20 meters • Precision 5-axis machinery supporting 4m, 6m, 8m, and 20m machining beds. • Capable of machining both hard and soft metals 2. Sheet Metal Fabrication • Roll forming (11m), skin stretch forming (10m) • Bladder and stretch wrap forming • Skin milling & NC routing 3. Composite • Specialized Curing Oven up to 15M • Layup Facility 4. In-house Heat Treatment Facility (NADCAP Accredited) Highlights √ Proven Korea Defense Offset Partner for Global OEM √ Integrated Global Program Operation in Korea and USA Facilities √ Boeing & Lockheed Martin Award Winning Supplier Project Highlight : • A32X/A330 Skin Structure, Floorgrid, Doors • KT-100 Full aircraft Integration • Helicopter Fuselage, Torque Box, Bulkhead, Leading Edge etc.

It is especially suited for demanding applications, which require reliable performance, such as missile seeker gimbal stabilization, where small size and low power consumption is required, while in a low cost design that is also ideally suited for high volume commercial applications. System Performance PARAMETERS SPECIFICATIONS Standard Ranges ±100°/sec, ±200°/sec, ±400°/sec Input Voltage + and - 5.0 Vdc Bandwidth 110 Hz Output Noise < 005°/sec/√Hz Scale Factor Accuracy ±1% Nominal Features Dual Axis Capabilities in Small Form Factor Miniature Size: Only 25gm.(1.05” x 0.71” diameter) Hermetically Sealed In Stainless Steel Cylinder High Reliability DC Input/High-Level DC Analog Output Low Cost Applications Tank Turret Stabilization Missile Targeting Platform Stabilization Antenna Stabilization Camera Stabilization Spacecraft

The SWE550S is a rugged 6U VPX fully managed Layer-2/3 Ethernet switch aligned with the SOSA profile, providing blazing-fast 25/100 GbE switching via a 3.2 Tbps fabric and flexible I/O reconfiguration. • 3.2 Tbps switch fabric delivering full wire-speed bandwidth (~2.5× typical) • Front: up to 2×100 GBASE-SR4 (MPO); Rear: up to 7×100 GBASE-SR4, SWE540A-compatible I/O • Fat-pipe ports reconfigurable into thin-pipe ports; copper ports support 25/100→10/40 Gb speed downgrade • Dual-core ARM + OpenWare™ management; built-in storage sanitization • SOSA-aligned 6U VPX form factor; air & conduction cooled; rugged Levels 1, C, E

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

an air conditioner mounted inside the tank

BERNIER designed the CMA-USBC line specially for equipment in harsh environments. The CMA-USBC connectors are Push-Pull military connectors that offer many possibilities of electronic integration as : USB Memory key, Authentification key, Wireless module, Crypto and Shunt module…