Weibel’s Doppler 3D tracking radars are designed for precise measurements of free-flying objects such as projectiles, artillery rounds, and rockets. The systems are highly effective for detailed debris tracking, range safety tests, missile tests, and space launches. Weibel’s tracking radars are phased array X-band CW, MFCW and FMCW radar systems consisting of state of the art phased array Doppler radar antennas, high performance pedestals, real-time multi-object tracking processors and state of the art waveform generators, all controlled from the operator console.

To complete their missions successfully in hostile territory, helicopters must have accurate, jam-resistant navigation systems that are able to operate effectively and dependably in all mission scenarios. These conditions may require high-speed, low-level flight over featureless, unknown terrain, and in the presence of enemy jamming.

Whether satellites, spacecraft or space debris – GESTRA, the "German Experimental Surveillance and Tracking Radar", is a state-of-the-art radar system for observing and tracking objects in space. It operates in the microwave range and explores the Low Earth Orbit of 300 to 3,000 kilometres, i.e. the range in which most satellites and the International Space Station (ISS) are located. This makes it possible, for example, to protect space systems or the ISS from a collision with debris particles by providing a timely warning. Millions of tiny particles orbit the earth and, at a speed of around 28,000 km/h, pose a threat to active space technologies. GESTRA was developed and built by the Fraunhofer Institute for High Frequency Physics and Radar Techniques FHR on behalf of the German Space Agency at DLR.

This miniature fin actuator manufactured by MPS Microsystems was designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, it meets strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

- Specialized in manufacturing Miniture ball screw - Shaft diameter 4mm~20mm - Precision grade C0~C7 - Shaft length differs depending on material, size, accuracy of shaft - Efficiency 90% or higher

The SC-HPCRTM is a Rear Transition Module (RTM) designed to extend the I/O functionality of the HPC2812 high-performance computing board. It can be mounted on the rear side of the VPX backplane to enhance system connectivity and I/O flexibility. Since the HPC2812 board consists of two computing nodes, the SC-HPCRTM provides dedicated interfaces for each node, including Ethernet, USB, MMCX, and Mini-HDMI ports, ensuring optimal data communication and display output performance in mission-critical embedded systems.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

A distributed sensor system based on BOTDA (Brillouin Optical Time Domain Analyzer), capable of detecting structural deformation and external intrusion.