In addition to honeycomb potting, sandwich components often also have to be sealed and thus reinforced in the edge areas. For this purpose, similar or even identical filling materials are used as those used for filling the honeycombs themselves. Namely, core and edge filling compounds with very low density, which is achieved by enriching the material with hollow spheres. With our dosing technology, this process can also be automated. The 1-component or 2-component materials are processed gently – without changing their material properties. The material application can be fully automated or semi-automated. Thanks to pulsation-free dispensing, the best results can be achieved with the minimum of effort. This allows you to reduce production times while optimizing production processes at the same time.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

- 3 axis Fiber Optic Gyroscopes / 3 axis MEMS Accelerometers - Operating Range: ± 490º/sec - Bias Repeatability(over temp. range) : ≤ 0.5º/hr (1σ, RMS) - In-run Bias Stability: 0.03º/hr (typical, 1σ) ≤ 0.05º/hr (max, 1σ) - Angle Random Walk : 0.025º/√hr (typical, 1σ) - Power Consumption: 5W @ 25℃ (< 8 W, @ - 40℃) - Input Voltage: + 5 V Lightweight Package: 790g (1.74 lbs)

This unit(SOU) supplies sealing oil to prevent mixing of hydraulic oil and liquefied methanol gas inside of FBIV(Fuel Booster Injection Valve) when the main engine operates. SOU is divided into large bore main engine(60 bore over) and small bore main engine(50 bore below) type by the number of membrane accumulator. The main components consist of an oil tank, an electric motor, a hydraulic gear pump, an oil filter, a control block, accumulators, and various senses, transmitters and indicators.

Hanwha is ramping up its response to the challenges of climate change as green energy becomes a global necessity. As a comprehensive green energy solutions provider, we are pioneering future markets by combining our energy production and transportation know-how with our expertise in energy sources and materials. Hanwha is at the forefront of building a green energy value chain that encompasses solar, hydrogen, and wind energy as well as green marine solutions. Our solar power business is expanding from module production to a fully integrated supply chain, in addition to offering high-value-added services using information technology. We are accelerating our development of onshore and offshore wind power generation and creating sustainable transformation in the ocean and marine energy ecosystem. From land-based energy solutions to low- and zero-carbon marine technologies, we are tapping into green energy’s outstanding potential and strengthening our competitiveness as a green energy solutions provider to lead the way to net zero.

KNF offers high qualified Aluminium products used in a wide range of markets around the world. *No.1 Stockholding & Qualified Aluminium Supplier *A1XXX/A2XXX/A3XXX/A5XXX/A6XXX/A7XXX Series and more *Business Areas: Aerospace & Defense / Semiconductor & Display / Marine & Silo / Automotive & EV Battery / Others

Heat engine that converts combustion energy into mechanical energy. It consists of a compressor, combustion chamber, and turbine, and is widely used in aircraft propulsion.

The ACTUS® CORE-2 Dot Sight is a high-performance optical device chosen as the Warrior Platform Selection Equipment by the Republic of Korea Army (ROKA). Built to MIL-SPEC standards, it is a further development of our ACTUS® CORE-1 Dot Sight. Housed in a smaller form factor, the ACTUS® CORE-2 meets rigorous military requirements, including extreme temperature resistance, shock testing, waterproofing, and protection against fluid contamination. Designed for durability and reliability, the CORE-2 enhances operator safety in the field, ensuring quick and precise target acquisition during critical missions.