The Nebula connector employs the renowned Hypertac hyperboloid contacts as the bedrock of its high reliability providing immunity to shock and vibration fretting and over 100,000 mating cycles. These features combine with current carrying capacity up to 1.5 Amps per contact and low insertion / extraction forces to provide significantly enhanced quality and reliability performance compared with other more commodity connector solutions. Available for direct mounting to PCB, the Nebula Series supports independent function for all its 22 contacts. It also offers optional quarter-turn locking hardware for faster connector securing and to prevent unintentional separation.

Specialty Tool Kits and Custom Sheet Metal Kits

RSAQ Series we designed is a series of Display Head Assembly Unit which is used in aeronautical instruments that meets the Air Transport Indicator (ATI) standard. Ruggedized Square TFT color LCD monitor is designed and tailored for use in harsh, demanding environments like Airborne application. RSAQ Series are 100% customized. Various types of ATI are available - LCD glass, LCD glass with T-con board and module with LED BLU

Power Supply 0...80V 0...510A 15000W

Frequency signal generator for precise target detection High-frequency resolution design and frequency conversion function using DDS method Main performance Frequency: L-Band ~ Ku-Band Accurate Chirp and Pulse Mode Output Level: +0dBm min Spurious: -40dBc min Harmonic: -50dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 50dBc Min Applicable fields Guided weapon tower system and radar system can be applied

Low Size, Weight and Power (SWaP) at only 297g. Up to 100 TOPS GPU by NVIDIA® Jetson Orin™ NX Supports multiple camera and sensor interfaces 2x GbE and 2x USB3 for RGB/ Infrared/ hyperspectral cameras and lidar/ radar 2x GMSL2 for HDR/ 3D cameras Built-in UART and CAN to interact with flight controller 1x M.2 2230 for storage and 4G/5G communication ready Supports 4S-14S drone battery pack Compatible GMSL2 cameras with pre-built drivers

1) Fabrication - possible Dismension : ~ D 1200 mm - Surface Errors PV < 79 nm RMS < 12 nm Roughness < 2 nm(Typical < 1nm) 2) Lightweight - lightweight Ratio : up to 82.5 % - Rib Thickness : ~ 2 mm - Face Sheet : ~ 7 mm - Lightweight Design & Fabrication

FSI is an authorized stocking distributor for Avdel/Pop, AVK, Cherry Aerospace, Gesipa USA, Huck, Sioux, Makita Assembly Tools and Zephyr Tool Group, Monobolt and Magna-Lok