• Band Width : L1/L5 or L1/L2 • Supported GNSS Constellations : GPS/Galileo/NavIC/GLONASS/BeiDou • Interference resistance : - Single jammer interference resistance up to 90 dB(J/S) - Multiple jammers interference resistance up to 82 dB(J/S) - Support of up to 3 jammers simultaneously for each of frequency bands • Interfaces : Digital output • Power Consumption : Low power consumption

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

Model-Based Systems Engineering (MBSE) is a methodology that integrates design, analysis, and verification activities throughout the system lifecycle using architecture models. By modeling requirements, functions, structure, and behavior, MBSE supports consistent and informed decision-making. Ansys SAM (System Architecture Modeler) supports the latest system modeling language, SysML v2, and enables both graphical and textual modeling, real-time collaboration, and model management. Ansys ModelCenter integrates various engineering tools and builds automated workflows, enabling what-if simulations and trade studies. By connecting architecture models with simulation models, it supports consistent design analysis and requirements validation using a single source of truth (ASoT).

High impedance D-Sub connectors are designed to ground the outer shield of a twinax or quadrax contact directly to the shell of the connector. A multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is an extremely low contact resistance when measured from the contact outer body to the connector flange, ensuring minimal RF noise and high durability of over 500 mating cycles.

InstructIQ analyzes flight simulator data in real time, identifies strengths and weaknesses, infers core competencies, and shows insights into the performance of each flight maneuver. InstructIQ provides data-driven pilot competency analytics using artificial intelligence (AI) to make training more efficient and effective. Implement standardized instruction across your training center without the need to make costly changes to your training media or purchase new training devices. Get the most out of your training center investments by connecting your training devices to a cloud-based AI.

Teledyne FLIR's Tau 2 series offers 40 variants of the most reliable and rugged longwave infrared (LWIR) thermal camera module. Equipped with a simple optica...

Learn how Tronair has differentiated itself in the market by offering a diverse and unparalleled range of high quality GSE product lines.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.