Digital Directory_700.webp)
Composite Tail Rotor Blades for Bell 206 JetRangers Fitted with New Bearings | Air Services Intl., LLC
Fitted with new feathering bearings
Manufactured by KAMATICS (KAMAN Aerospace)
5,000-hour time life
Twice the life of the standard OEM blade
Significant noise reduction
68% reduction over OEM Blades
Higher margin of safety due to increased strength
Tested for over 51 million cycles
Composite Tail Rotor Blades for Bell 206 JetRangers Fitted with New Bearings | Air Services Intl., LLC
For the Bell 206A & 206B Series JetRanger Helicopter New to the market, composite tail rotor blades available for Bell 206 series helicopters: The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades.
Products & Services
Engine Accessories for Model 250 Rolls-Royce (Allison) Turbines
Air Services International
Engine accessories for Model 250 Rolls-Royce (Allison) gas turbine engines. Bleed Valves, Fuel Controls, Fuel Nozzles, Fuel Pumps, Governors & more.
Newsletter Signup | Air Services Int'l., LLC
Air Services International
Stay in touch with ASI. Enter your e-mail and subscribe to our newsletter. Email Full Name Once signed up, you will begin receiving our newsletter. We will not sell or distribute your email address to any third party at any time.*After clicking subscribe you will receive a confirmation email.
Engine Modules for M250 Rolls-Royce (Allison) Gas Turbine Engines
Air Services International
Engine modules for Rolls-Royce (Allison) Model 250 gas turbine engine series. Maintenance, repair, overhaul, rentals, exchanges, sales and service.
People
Description
The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings.
The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive.
The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.
The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive.
The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.
