Type : Axial (3P) Size(Ø, mm) : 310 × 109 Weight(kg) : 37 N. Speed(rpm) : 2100 N. Torque(Nm) : 450 N. Power(kW) : 100

InterGravity Technologies has developed a 20 Newton-class bipropellant thruster designed for orbital transfer vehicles (OTVs), lunar hoppers, and micro-spacecraft requiring high efficiency, reliability, and reusability. The thruster operates with green propellants (C₂H₆, N₂O), providing both environmental compatibility and storability advantages. Key Features -Thrust Level : 20N -Specific Impulse : > 295s in vacuum

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

JEFF FALCON is the tactical spectacle for Military & Law Enforcement. The lightweight glasses give you super flexibility for comfortable fit in use. It is compliant with ANSI Z87.1 requirement and exceed U.S. Military eyewear ballistic resistance requirement MIL-PRF-3242A. Anti-Scratch and Anti-Reflection coating on polycarbonate lenses give you up to 99.9 protections from UV rays and thin temples enable compatibility with communication systems and helmets.

Premium refined titanium ingots, manufactured using imported high-purity titanium sponge and subjected to a minimum of two VAR (Vacuum Arc Remelting) processes. Forged to meet customer requirements, available in various semi-finished forms (bar, plate, ring) for defense and display industries.

Tactical Mobile Anti Drone Rifle system offers directional and Omni-directional solutions (selected by the operator) for pilot-controlled or autonomous GNSS-guided (waypoint) drone threats. The field proven ergonomic, modular and light-weight solution of the legacy RF Jammer system is customized for drone threats within this system. The scope on the rifle is used to aim to the threat and neutralize it with directional antenna system. For multiple drone threats or area protection, Omni-directional antenna system is used. Field Proven ergonomic and efficient design Directional and Omni-Directional Jamming Infrastructure RF Jamming Frequencies include; -GNSS Frequencies -Drone Control and Data Links Area Protection (fixed use) -Omni-Directional Antennas for area coverage -Remote Control (option) -Continuous operation from mains (220 Vac or other) (option) Different battery options are available upon request