We carry a wide range of aerospace-grade materials in round bar, including: -Alloy 718 (AMS5662, AMS5663) -Alloy 625 (AMS5666) -Alloy X (AMS5754) -Titanium Grade 5 (AMS4928) -A286 (AMS5732, AMS5737) -17-4PH (AMS5643) -17-4PH H1025 (AMS5643) -321 Stainless Steel (AMS5645) There is no minimum order quantity ? we can cut from a single piece and ship within 1?2 days, complete with full material traceability. For non-stock grades, shapes, and standards, we can source materials from suppliers worldwide with a lead time of approximately 2 weeks, also with no minimum order quantity.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

Our products are used for manufacturing interior design components for civil and military aircraft construction. Sandwich structures are used in many areas of an aircraft (storage compartments, interiors, wings) to reduce weight. In order to structurally strengthen the honeycombs or insert them, they often have to be filled during the production process. Typical materials are one- and two-component epoxy resins with a very high proportion of hollow glass spheres. These require extremely gentle handling, as they would otherwise be destroyed, which in turn would result in an increase in density. Common application patterns are beads, circles, full surfaces and egde-filling. The job is often done manually, which results in long production times and high running costs due to material waste. Lack of reproducibility is just as problematic as the health hazard often posed by these media. The ViscoTec solution: Material is continuously fed to the dosing system by removal from a large container. With the help of a robot or axis system, suitable structures can be mapped reliably. A coordinated overall system delivers a dispensing result according to specification, in which operator interaction is reduced to a minimum.

The engine is suitable for MALE AUVs. Available in pusher and tractor configurations. Digital interface for control and monitoring. Stable operation at high altitudes and high temperatures. Ability to run at cold temperatures below -30°C without preheating.

AuraGen® ... Unlike a traditional generator, this induction power system fits under the hood of a vehicle and can generate enough pure sine wave electricity to handle your power needs. The AuraGen's safety, reliability, portability, virtually silent operation, and convenience make it ideal for use during everyday commercial work or anywhere that conventional power is absent. No maintenance, no theft problems and no hazard for employees means higher productivity and higher profits. The AuraGen® comes complete with the AuraGen® power source, electronics, idle control, and mounting bracket and provides an environmentally friendly alternative to heavy polluting gensets. AuraGen® is available for most fleets, municipal and work site vehicles as well as full-sized pickups and SUV's.

- When flying in information, azimuth information about the attitude and position of the lead aircraft is provided to pilots of surrounding aircraft in the formation - Light Intensity : 6 cd (Beam Spread : 60) - NVIS Green A/IR per MIL-STD-3009

PELICAN-D JT is a MWIR detector for missile applications. The FPA is InSb based, having digital Readout Integrated Circuit (ROIC) in a format of 640 x 512 with 15μm pitch. Pelican-D JT has a unique structure of Dewar which enables very fast cool down time and hence quick mission readiness using Joule-Thomson (JT) cooler. Due to the low heat load on the focal plane, the detector achieves long mission duration. The Detector can be supplied with a proximity board which provides Camera Link interface to the customer system. This highly simplifies the integration of the detector to the system.

SamTra International was established as a privately owned trading company in Seoul Korea on March 17, 1995, specialized in selling various type of special cables, connectors and cable assemblies for high reliable, high life time & mission-critical applications, and recently in supplying high performance electro-mechanical & optical components, such as air moving low noise level fans & blowers, and brushless motors and DC torque motors, actuators, slip rings, rotary joints, optical transceivers and ethernet switches for optical network communication in aero-mil applications.