- Operates by an internal pipeline open/close mechanism controlled by a solenoid valve - Relief plug: prevents malfunction due to internal pressure expansion - Manual discharge available via manual handle when power is OFF - Outputs an abnormal signal if the reference pressure drops due to extinguishing agent leakage

- Interior light that illuminates the entire cockpit - Adjust the DIM/BRT brightness by operating the knob switch - NVIS WHITE per MIL-STD-3009

PELICAN-D LW is a 640x512 elements, 15μm pitch, Type-2 SuperLattice (T2SL) technology based 2D Long Wave Infrared (LWIR) digital IDCA. The new ROIC outputs digital signal, similarly to SCD’s previous digital detectors: Sebastian-320, Sebastian-480, Sebastian-640, Pelican-D, Hercules, and Blackbird. Pelican-D LW is available in the same configurations as the standard (MW) Pelican-D, with a large variety of cold shield apertures and cooler types. The proximity board provides the FPA timing and sensitive power supplies. Camera-Link interface highly simplifies the integration of the detector to the system.

From design to manufacturing and follow-up support, Huneed Technologies provides safe, reliable, and cost-effective mission-critical wireless communications systems for the military. We provide a diverse portfolio of communications equipment to the Korean military and can work with international governments to meet or exceed their demanding requirements.

ts advanced integrated optics and closed-loop Field Programmable Gate Array (FPGA) electronics deliver much higher accuracy, lower noise and greater efficiency than competing technologies. In addition, the EG-1300 can be calibrated internally for better thermal effect and has both digital and analog outputs, along with separation of the electronics from the FOG’s sensing coil assembly to accommodate the widest variety of installation parameters. Features Fully-integrated optics and electronics Advanced optics and FPGA electronics for higher accuracy, lower noise and greater efficiency Precise navigation (1 mile/hour without GPS) Fast, precise gyrocompassing to 1 milliradian Bandwidth to 500 Hz Separate electronics and sensor modules More economical than competing systems Applications Navigational grade applications Unmanned aerial vehicle (UAV) guidance Missile guidance Aeronautics and aviation Robotics

The Crane stands as a state-of-the-art Mid-Wave Infrared (MWIR) detector. This device features a 5-megapixel resolution in a 2560×2048 format with a fine 5μm pitch. It is based on SCD's established XBn technology or Hot Full Midwave (HFM) and incorporates a digital readout circuit developed using an advanced CMOS process. The High Operating Temperature (HOT) Focal Plane Array (FPA) functions efficiently at 150K or 120K, enabling a large-format detector that excels in image quality while maintaining a relatively compact size, weight, and power consumption. SCD continues to lead in innovation.

Ultra-High Accuracy MEMS Motus features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Motus’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Motus is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. Miniature Package Never before has such high inertial performance been available in such a small package. Motus consumes just over 1 cubic inch in volume and weighs only 26 grams. This makes it ideal for weight and size sensitive applications. Motus is available in an OEM package suitable for integration into larger products or an enclosed package for external and standalone use. Advanced Signal Processing Motus samples its sensors synchronously at 1000Hz through six individual 24-bit differential ADCs which minimizes noise as well as providing optimal thermal calibration and performance characteristics. 14 separate heavily filtered regulated power supplies ensure that each sensor and ADC is operating off the cleanest possible power supply. Reliability Motus has been designed from the ground up for mission critical control applications where reliability is very important. It is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance in mind. The hardware is designed and manufactured to mil standards. High Update Rate Motus outputs temperature calibrated sensor data at 1000Hz as well as filtered attitude at the same rate. This allows for control of dynamically unstable platforms.