The SC-DSPRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the DSP282A. When the DSP282A board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-DSPRTM board into the back of the Backplane. The DSP282A board consists of two computing nodes. To support this, Ethernet, USB, MMCX, and mini-HDMI ports are allocated to each node, and synchronization signal input ports can also be used simultaneously on both nodes.

Features NO MELT, NO DRIP (50/50 Nylon Cotton) Ergonomic design for comfort fit Velcro® patch attachment on sleeves Long sleeves with reinforced elbows Reliable components (YKK military zipper, etc.) Composition Sleeves: Nylon 50%, Cotton 50% Body: Functionalized Polyester, Polyurethane Size 95 ~ 115 Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

A gas container that stores ultra-high-purity nitrogen gas at high pressure and supplies it for seeker cooling when needed. It is designed to prevent gas loss even during long-term storage.

Whether satellites, spacecraft or space debris – GESTRA, the "German Experimental Surveillance and Tracking Radar", is a state-of-the-art radar system for observing and tracking objects in space. It operates in the microwave range and explores the Low Earth Orbit of 300 to 3,000 kilometres, i.e. the range in which most satellites and the International Space Station (ISS) are located. This makes it possible, for example, to protect space systems or the ISS from a collision with debris particles by providing a timely warning. Millions of tiny particles orbit the earth and, at a speed of around 28,000 km/h, pose a threat to active space technologies. GESTRA was developed and built by the Fraunhofer Institute for High Frequency Physics and Radar Techniques FHR on behalf of the German Space Agency at DLR.

The Crane stands as a state-of-the-art Mid-Wave Infrared (MWIR) detector. This device features a 5-megapixel resolution in a 2560×2048 format with a fine 5μm pitch. It is based on SCD's established XBn technology or Hot Full Midwave (HFM) and incorporates a digital readout circuit developed using an advanced CMOS process. The High Operating Temperature (HOT) Focal Plane Array (FPA) functions efficiently at 150K or 120K, enabling a large-format detector that excels in image quality while maintaining a relatively compact size, weight, and power consumption. SCD continues to lead in innovation.

The N Series of mini modular, high density connectors offers a variety of combinations in a single connector frame. It employs a do-it-yourself system based on the building block principle, which allows users to select the connector design that meets their specific requirements through off-the-shelf components.

ㅇKey Features -Provide communication Interface of at least 100Mbps -Ensuring a fixed bandwidth of communication processors and providing a deterministic communication environment by utilizing Virtual Link(VL) and BAG method -Provide SNMP, UDP, TCP, ICMP protocols ㅇQuality and Certification - DO - 178B DAL A - MIL-STD-810G - MIL-STD-461F

Product Description and Features 1. Usable Time: Approximately 4 hours 2. Breathable Coolant: Semi-permanent (reusable) 3. Oxygen cylinders and valves: Inspected by the Korea Gas Safety Corporation (KGS) 4. Materials: Outer fabric and PET material are heat-resistant. 5. Drain Button: A device for removing moisture depending on the usage time. 6. Supply Button: A device that temporarily provides a large amount of oxygen. 7. Facepiece: Includes a manual defrost for long-term use. 8. Electronic Pressure Indicator with IT Technology: Life-Saving Alarm (PASS) function, ambient temperature display, container pressure display, automatic alarm for low pressure (approximately 50 bar), usable time display, battery status display, and NFC-based personnel monitoring system (free software provided). 9. Accessories: Bone conduction communication equipment can be applied.