Type : Radial (3P) Size(Ø, mm) : 152 × 106 Weight(kg) : 5.1 N. Speed(rpm) : 2000 N. Torque(Nm) : 55 N. Power(kW) : 11.5

The SC-SBCRTM-V2 is a Rear Transition Module (RTM) designed to extend the I/O functionality of the SBC6511 single-board computer. Mounted on the rear side of the main VPX backplane, this module provides additional I/O expansion through Micro-D and D-sub connectors for synchronization signals, two Ethernet ports, two Mini-DisplayPort video outputs, two USB interfaces, and MMCX connectors. It enhances system flexibility and connectivity for embedded and radar signal-processing applications.

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

By affiliating with asahi-Kasei EMD in 1999 recognized as a greatest electronic and chemistry company in Japan, we have been supplied Master roll by Asahi-kasei and that allowed us to meet our customer's needs from the time our company was established. We supply not only household products but also high technology semiconductor package products for domestic market.

Toxic gases, such as Silane (SiH4), Nitrogen Trifluoride (NF3), Sulphur Hexafluoride (SF6), Ammonia (NH3), Nitrous Oxide (N2O), etc. must be contained in IMDG certified MEGC tubes for ocean transportation. For high purity gases such as SiH₄, and NF₃, DS Aether CT provides internal-polished tubes to a grade of 3S, 25S, etc. depending on customer's requirements. DS Aether CT’s tubes keep moisture levels below 1 ppm or 3 ppm by a heated vacuuming process so that gas quality can be maintained at high purity level.

"It is a product lineup that is proven in global markets and has world-class competitiveness. And it is being exported to more than 20 countries around the world."

The ECL4000 is an LTE outdoor base station developed for the U.S. CBRS market, providing a service radius of several kilometers and enabling seamless private LTE network service.

The eco-friendly era, it all begins with the Energy Storage System. VITZROCELL's EDLC is a next-generation energy storage device that offers a high energy density and can be used semi-permanently.