As successor to the best-selling JIM LR, JIM Compact offers even more advanced capabilities at a weight of less than 2 kg, providing users with the best performance-to-weight ratio of any device in its class. Intuitive, durable and modular, JIM Compact gives land and special operations forces everything they need to enhance their situational awareness at any time.

Small wind power systems and component components Durability technologies: Composites - nacelle, blades, corrosion protection Stability technology: and wind speed control (electrical) + tail folding (mechanical) High-efficiency system: Direct-drive PMSG - slotless, blades, coefficient of power (Cp): 0.429 MPPT (Maximum Power Point Tracker) : Maximum power following control Web monitoring: Real-time monitoring Easy to maintain and install Quality Assurance: More than 3 years System certification: New and renewable energy facility certification, new product (NEP), excellent product designation by the Public Procurement Service - Korea's first Element parts certification: generator, inverter-CE, blade static load test, demonstration test completed Annual average wind speed of 4.5m/s or more

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

RFcore has been innovating MMIC solutions for phased array system pursuing more ease of use, higher performance, higher level of integration as well as lower cost. We believe that the most suitable way is exploiting properties of God gifted semiconductor Silicon and GaN. We aim at integrating all components of TRM for active phased array on single die and even multi-channel TRM too.

R&S®M3SR은 민간, 방위, 해상 지-공-지 통신 솔루션을 위한 최신 고정식 무전기를 대표하는 기기입니다. 로데슈바르즈는 점차 엄격해지는 통신 요구사항에 대해 수년 간의 실무 경험을 기반으로 한 기술 개념으로 대응하고 있습니다. 무전기는 가장 엄격한 품질 측면을 충족하여 최대 RF 성능을 제공합니다. 이 고성능 소프트웨어 정의 무전기는 전 세계 보안 당국과 정부 조직에서 높은 평가를 받고 있습니다.

characteristicRear wheel drive type (5 forward speeds, 1 reverse speed) Cable Remote Control Type 2nd and 3rd speed Triple Synchro applied apply2.5-ton trucks and medium-sized buses, 3.5-ton trucks and medium-sized buses

CAPHMICRO has the ability to design and manufacture wire harnesses and cable assemblies for defense, aerospace, and space launch vehicles/satellites. We design and manufacture in compliance with IPC-620 and J-STD-001 standards. Additionally, we have a global supply chain capable of quickly supplying a wide range of materials. We provide comprehensive solutions for wire harnesses, from design through to manufacturing and inspection.

ARDRONIS는 로데슈바르즈의 드론 대응 솔루션 제품군입니다. 복합 시스템 접근 방식으로 고객이 각각의 고유한 최종 사용자 요구사항에 따라 악의적이고 비협조적 위협을 탐지-식별-위치 확인-추적-검증-대응할 수 있습니다. ARDRONIS가 RC 드론 활동을 탐지하면 드론 신호의 유형을 자동으로 분류하고, 드론의 방향과 조종자를 확인한 다음, 드론이 목표물에 도달할 수 없도록 무선 제어 링크를 차단합니다. 대부분의 상업용 원격 제어 드론은 최신 주파수 가변 파형인 FHSS(Frequency Hopping Spread Spectrum)를 통해 제어합니다(업링크). 기타 일반적인 드론 유형은 Wi-Fi을 통해 제어합니다(업링크). 드론에서 전송하는 신호(다운링크)는 일반적으로 FHSS, Wideband 또는 Wi-Fi 신호입니다.