AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens is a first to market low-Size, Weight, and Power (SWaP), compact lens, for the newly introduced 5μm SXGA, as well as for 10μm SXGA, and 15μm VGA SWIR detectors. The SWIR & NIR zoom lens employs a unique mechanical and optical design, resulting in an all-around smaller and lighter unit with only 860gr in weight, and 224mm in length, making it approximately 60% lighter than similar existing SWIR lenses. The SWIR lens is also chromatically corrected to support a broader short-wave IR wavelength regime from 0.7-1.7μm and operates with minimal distortion. The SWIR & NIR 25-250mm f/5.5 (NFOV) f/4.0 (WFOV) continuous zoom lens presents an unrivaled combination of SWaP capabilities, detection range exceeding 26km. Product features: • Continuous zoom in the 0.7-1.7μm SWIR regime • Designed for 5μm, 10μm SXGA & 15μm VGA SWIR detectors • Lightweight (<860 gr) • Detection range >26 km • Enables laser-line detection

Patria OPTIME covers a broad range of services and solutions impacting the fleet availability, such as fleet maintenance, upcoming modification projects and needed integrations in the later stages of the lifecycle as well as supply chain management and training services. Patria OPTIME is a modular service model that is always tailored to the customer needs and requirements, and it is set up in phases together with the customer. Patria OPTIME combines top-notch engineering expertise with efficient data utilization in a unique way for the sustainment of military equipment. There is no comparable, comprehensive, manufacturer-independent and data-driven solution that can be deployed in all operating environments available from other market actors. It is a data-driven concept, which ensures the performance and cost-effective operation of the fleet. In the centre of the concept is data collection from the fleet usage and maintenance. Even during a crisis, the customer can count on Patria’s support. Patria’s service covers the entire lifecycle of the fleets The lifecycle for military fleets is typically decades-long – and thus, in addition to ordinary maintenance, repairs and overhauls, the fleets must undergo major upgrades, repairs and system/structural modifications during the lifecycle to fulfil required capabilities. Patria has strong experience and expertise in all these demanding activities – for land vehicles, aircraft and marine vessels. Patria OPTIME also covers the management of fleet MRO supply chains, as required by the customer. Data analysis makes it possible to anticipate the future need for spare parts and to optimally plan the deliveries and storage of these parts. The concept of operations of high-performance assets is also essential part of effective system usage. Patria can support this with years of experience in data collection from a range of fleets as part of mission support services. This brings exclusive offering for Patria’s training services. For instance, in Finland, Patria is responsible for elementary and basic pilot training for the Air Force, Army and Border Guard and provides training services for maintenance staff. Patria OPTIME is set up according to the customer’s requirements The specification of the Patria OPTIME solution begins with an assessment of the current state of the customer’s operating environment, equipment and sustainment solution as well as the requirements set for them. After a successful feasibility study, there will be a more thorough value proposal phase together with the customer. Patria OPTIME ensures the performance of different kinds of fleets in all conditions over their entire lifecycle.

We are recognized domestically and internationally for our technology and quality by supplying turbocharger parts and other parts that require high reliability and technology to ship and engine manufacturers .

Counter-UAS Solutions for Government & Defense

Taesang manufactures Fixed Wing Aircraft using advanced closed die forging technology with SMS Group equipment. This process ensures precision, consistency, and superior quality for critical aerospace applications

Purposed for people carrying two or more radios (JTAC, LEADER, RTO, etc) Removable shoulder & waist straps can be adjusted to fit the end-user without removing the rack Attaching to select tactical plate carriers with the QASM buckle system or using stand-alone with H Harness Small 4-way stretch Tweave general purpose pouch (Qty.1) Magazine pouches for 5.56mm or 7.62mm mags (Qty. 2) PRC-152A or 148 radio pouches (Qty. 2) Removable antimicrobial/FR treated spacer mesh pad Compatibility : PICO-DSX, PICO-DS, PICO-MBAV, EPIC-FED, EPIC-LOC-MOL & EPIC-DSX Composition Material : 500D Cordura® + ARAMID / PV® Color : MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)