The 6-degrees-of-freedom (6-DOF) motion platform system utilizes six types of motion—heave, roll, pitch, surge, sway, and yaw—to replicate real-world environmental movements and verify the operational durability and reliability of test products. Possesses Korea’s only proprietary 8-axis expansion technology (6-DOF + 2 additional axes), developed in-house. Duratek designs and manufactures fully domestic electric motion platforms, with integrated capabilities covering software control, user interface (UI), and sensor fusion technologies.

The Improved Fire Control System (IFCS) PNU / Universal Fire Control System (UFCS) UPNU family represents a true state-of-the-art system approach. Its design features permit ready adaptation and/or optimization to any current or future weapon system or sensor requiring precision pointing and positioning. The PNU / UPNU and its variants point the way for the future direction of the land navigation systems. Utilizing advanced sensors, electronics, software and aiding (GPS and odometer), the PNU / UPNU family delivers precisely what the Army of tomorrow needs — a system designed to remain operationally effective and affordable to support well into the future. Features High-performance RLG-34 ring laser gyros Common architecture and components (Paladin, PIM, Firefinder, IPADS) Embedded 12-channel Selective Availability Anti-Spoofing Module (SAASM) Impervious to jamming (inertial mode) Resistant to jamming (GPS-aided mode) Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Multiple Launch Rocket System (MLRS) High-Mobility Artillery Rocket System (HIMARS) Pointing and position location

The SCXMC-HDLC card operates through the XMC interface of the SBC and provides real-time communication for control and status data based on synchronization signals. It supports serial communication via the SBCRTM’s Micro D-sub 37-pin connector using a standard D-sub 9-pin interface, allowing long-distance transmission through LVDS signaling. With four transmit/receive channels, it achieves 1–8 Mbps per channel and delivers low-latency performance of less than 40 µs for real-time operations. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, enabling fast and reliable control data communication across mission-critical components.

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.

GE and Safran are evaluating several promising architectures as part of their technology maturation plan. The most ambitious, the one that will yield the gre...

BAE Systems is transforming the future of flight with solutions to enable hybrid and all-electric powered aircraft. We bring decades of demonstrated cross do...

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration

The SDT F 16 Combat Training Pod is mounted on F-16 and similar air platforms in an external pod, and ensures efficiency in exercises and in the provision of air-to-air and air-to-ground tactics training to pilots. SDT F - 16 Combat Training Pod features advanced air-to-air and air-to-ground combat training capabilities, such as real-time autonomous position generation, weapon simulation and real-time hit/miss notification, thanks to its long-range and high-speed RF data link and integrated processors. The system has mission planning, live monitoring, debriefing and analysis/evaluation features. The SDT F 16 Combat Training Pod enables training in real flight conditions and in multi-threat/target environments. Its high-speed data link and modular design mean that the System is also a Live-Virtual-Constructive (LVC) training infrastructure.