This fully self-contained pressure test and calibration system combines pressure generation, signal measurement, and loop power to deliver all the convenience of the Druck DPI 610/615, while being half the size, twice as accurate and easy to use. The DPI 611 is the fourth generation of the DPI 600 family, first introduced in 1984. The DPI 600 family revolutionized testing and calibration by providing all the tools for pressure generation and signal measurement in a stand-alone portable package. The DPI 600 soon became the flagship equipment of the industry and today it is simply known as "Druck". Built on a technical legacy and more than 30 years of experience in pressure measurement and calibration, the DPI 611 offers all the convenience and reliability of a true "Druck", while delivering double the performance of a product half its size.

The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.

Slice6 AIR, Slice6 Air BR 는 극한 시험 환경에서 아날로그 신호를 정밀하게 측정할 수 있도록 설계된 통합 데이터 수집 장비로, 크기, 무게, 전력(SWaP)에 최적화되어 제한된 공간과 질량 조건에서도 효과적으로 운용할 수 있습니다. 각 모듈은 마이크로프로세서, 이더넷 스위치, 신호 조정 회로, 비휘발성 메모리를 포함하고 있습니다. 독립형, 네트워크형, 기존 시스템 통합형 등 다양한 운용 방식에 대응하며, IRIG 포맷 기반 실시간 스트리밍과 이중 저장 기능을 통해 실시간 모니터링과 백업을 동시에 수행할 수 있습니다. Ethernet-based data acquisition unit (DAU) for flight test and ground shock test. SLICE6 AIR, SLICE6 AIR BR is a complete data acquisition unit for measuring analog signals in extreme test environments. Optimized for size, weight, and power (SWaP), SLICE6 AIR is ideal for applications with tight size and mass constraints. Each module features a microprocessor, Ethernet switch, signal conditioning, and non-volatile memory. The versatile SLICE6 AIR can be used standalone, networked for high channel count tests, or integrated into existing Ethernet-based flight test instrumentation. Real-time streaming in IRIG formats and dual store-in-place recording enables both real-time monitoring and redundant back-up of data on a single device.

Spring probes provide reliable electro-mechanical performance through hundreds of thousands of cycles. They are available in a variety of sizes, spring forces and terminations. Smiths Interconnect compression mount connectors utilizing spring probe technology offer tremendous advantages in reliability, performance and efficiency in comparison to conventional technologies like stamped metal, wire mesh, pin-and-socket or elastomer. Standard spring probes offering includes battery contact and connector probes designed to optimize contact performance in high-reliability, multiple-cycle interconnect applications.

The SCVPX-SSGM (Synchronous Signal Generation Module) generates synchronization signals to coordinate the operation and timing of various radar system components. It can generate synchronization signals using an internal clock, receive an external clock, or regenerate synchronization signals from external sources to maintain precise timing cycles. A device driver program is required for configuration and operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, providing precise timing synchronization across mission-critical subsystems.

Monitors abnormal engine operation based on digital and analog signals from the aircraft engine. It calculates engine life indices and detects engine malfunctions for generate a Pilot Fault List (PFL), which will stored in memory. When an engine failure is detected, it provides warning for display on the Central Maintenance Panel (CMP). Developed as a replacement for obsolete, achieving 60% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x16 Discrete Inout - x14 Discrete Output - x3 Analog Input - x1 RS-232 - Size: 283 x 265 x 89 (mm) - Weight : 4.1Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 25W)

SJP’s connector components are designed and manufactured to meet the highest standards of precision and reliability across industries. Equipped with state-of-the-art CNC multi-tasking machines and extensive know-how, we deliver solutions ranging from fine threading to complex geometries. Our connectors are widely applied in electronics, medical devices, aerospace, and defense, where durability and stable connectivity are critical. Through customized design services and fast lead times, we help our clients enhance their product competitiveness.

Contribute the Enhancement of Armed Forces with Continuous Technology Development Designed for replacing the Republic of Korea Army(RoKA)’s aged attack helicopter (500MD, AH-1S), the LAH(Light Armed Helicopter) Project is the one that aims to develop a cutting-edge armed helicopter suitable for the modern battlefield. Through the synergy of maximizing commonality in subsystems and parts with LCH(Light Civil Helicopter), KAI will reduce the development, production, and sustainment cost ultimately to be a bridgehead for a global helicopter market. The first flight of LAH was successfully conducted in 2019. KAI aims to complete the development of LAH in 2023.