STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

L3Harris search page.

Slice6 AIR, Slice6 Air BR 는 극한 시험 환경에서 아날로그 신호를 정밀하게 측정할 수 있도록 설계된 통합 데이터 수집 장비로, 크기, 무게, 전력(SWaP)에 최적화되어 제한된 공간과 질량 조건에서도 효과적으로 운용할 수 있습니다. 각 모듈은 마이크로프로세서, 이더넷 스위치, 신호 조정 회로, 비휘발성 메모리를 포함하고 있습니다. 독립형, 네트워크형, 기존 시스템 통합형 등 다양한 운용 방식에 대응하며, IRIG 포맷 기반 실시간 스트리밍과 이중 저장 기능을 통해 실시간 모니터링과 백업을 동시에 수행할 수 있습니다. Ethernet-based data acquisition unit (DAU) for flight test and ground shock test. SLICE6 AIR, SLICE6 AIR BR is a complete data acquisition unit for measuring analog signals in extreme test environments. Optimized for size, weight, and power (SWaP), SLICE6 AIR is ideal for applications with tight size and mass constraints. Each module features a microprocessor, Ethernet switch, signal conditioning, and non-volatile memory. The versatile SLICE6 AIR can be used standalone, networked for high channel count tests, or integrated into existing Ethernet-based flight test instrumentation. Real-time streaming in IRIG formats and dual store-in-place recording enables both real-time monitoring and redundant back-up of data on a single device.

A Main Generator installed in the KUH series that supplies system power.

An optical fusion splicer is a device that connects two optical fibers by fusing the ends at high temperatures. This process minimizes optical fiber loss, maintains signal transmission quality, and provides a durable connection. It is an essential tool in optical communication networks, and is particularly utilized in FTTx, data centers, and long-distance optical cable installations. Features - Low loss and high reliability. - Fast and accurate connection. - Small and lightweight equipment. - Compatible with various fibers. - User-friendly interface. - Reduced maintenance costs. Application Area - Data Center - Optical Communication Network Construction

The Fibre Channel D-sub connector series features a multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is extremely low contact resistance when measured from the contact outer body to the connector flange. The Fibre Channel D-Sub series also delivers superior performance ensuring minimal RF noise and high durability up to 1,000 mating cycles, while meeting and surpassing all requirements of MIL-STD-202 for shock and vibration. Offered with 150 Ohm quadrax contacts, the connectors are available with 2, 4, 6 or 8 way insert arrangements. Additionally, D-Sub connectors feature ease of assembly, and a robust and comprehensive training package. To ensure that the correct high speed connectors are mated to address specific wiring requirements and keying functions, a keyed jack post option has been incorporated into the design. The six-positioned post allows for 36 possible keying combinations assuring that the correct Fibre Channel D-Sub plug is mated to the correct high speed receptacle. Non-keyed jack post versions are available as well. Fibre Channel D-Sub connectors feature size 3 quadrax contacts which are 30% larger than the size 9 configuration utilized in the 100 Ohm quadrax, ensuring a matched impedance signal throughout the contact mated pair at 150 Ohm differential impedance. These features ensure that Smiths Interconnect's Fibre Channel D-Sub connectors deliver the critical edge customers require.

The high performance of the aerospace industry, in both technical and economic aspects, is due in part to its control over the supply chain and its quality throughout the value chain (from the buyer to the SME providers). For GIFAS, it is imperative to continue in this way to keep the industry competitive.

ARDRONIS는 로데슈바르즈의 드론 대응 솔루션 제품군입니다. 복합 시스템 접근 방식으로 고객이 각각의 고유한 최종 사용자 요구사항에 따라 악의적이고 비협조적 위협을 탐지-식별-위치 확인-추적-검증-대응할 수 있습니다. ARDRONIS가 RC 드론 활동을 탐지하면 드론 신호의 유형을 자동으로 분류하고, 드론의 방향과 조종자를 확인한 다음, 드론이 목표물에 도달할 수 없도록 무선 제어 링크를 차단합니다. 대부분의 상업용 원격 제어 드론은 최신 주파수 가변 파형인 FHSS(Frequency Hopping Spread Spectrum)를 통해 제어합니다(업링크). 기타 일반적인 드론 유형은 Wi-Fi을 통해 제어합니다(업링크). 드론에서 전송하는 신호(다운링크)는 일반적으로 FHSS, Wideband 또는 Wi-Fi 신호입니다.