- Interior/Exterior lighting control device - Input Power : 28 VDC - MIL-STD-461 - MIL-STD-704 - RTCA/DO-160 Section 25

Driven by two micro motors strategically positioned at the edges of the assembly, the design remains ultra-thin, making it ideal for through-hole configurations in optical applications requiring precise transmission. The innovative symmetry of the flexure plates allows for a range of mechanical displacements, enabling unique combinations that can be tailored to your needs. Whether you require extended strokes, precise X-Y stage movement, an additional Z dimension for an X-Y-Z system, or independent lateral displacements of two objects, our multiaxis micropositioning stage is designed to adapt. Scalability is at the heart of this design. By adjusting a few key dimensions, the multiaxis micropositioning plate can be customized to meet the specific requirements of applications that demand smooth motion, long-lasting durability, and maintenance-free, repeatable positioning.

Specification Array Format : 1280 × 1024 Pixel pitch : 10㎛ Spectral range : 0.9㎛ ~ 1.7㎛ (SWIR) Operability : ≥ 99.5% Quantum Efficiency : 70% @ 1550nm Application Near-infrared Imaging Imaging Spectroscopy Surveillance Medical Science and Biology Astronomy and Scientific Material inspection Food inspection Forgery detection

EMCORE’s IPADS-I (International) provides significant enhancements for today’s Army and Marine Corps survey teams. IPADS offers a proven, reliable, lightweight, off-the-shelf solution developed around four main components. > Compact Position/Navigation Unit (CPNU) > Control and Display Unit (CDU) > Battery and Charger Unit (BCU) > Porro Prism Assembly (PPA) All components are housed in a robust frame that allows for easy component access and stability, while facilitating a ready, two-person transfer between vehicles and aircraft. Features High-precision common survey enables efficient mass fires Impervious to jamming (inertial mode) Embedded Selective Availability Anti-Spoofing Module (SAASM) GPS option Navigation aids (compass rose and digital maps) In-vehicle and offset survey Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Artillery Survey to Mark: Survey Control Point (SCP) position; used to initialize weapon systems Orienting Line (OL) position and azimuth; used to initialize and align artillery assets

Vector AI provides real-time, high-resolution ISR data with minimal signature and a modular architecture that allows it to adapt to various mission profiles. With thousands of operational hours, including in active combat in the Ukraine, Vector AI is trusted by defence and security forces globally. Key Features: Up to 180 minutes of flight time Silent electric propulsion Fixed-wing performance with VTOL convenience AI-powered onboard computing and object recognition Open systems architecture for flexible payload integration Seamless switch to multicopter configuration using shared hardware

AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility. • QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4 • Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422 • Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C • DO-254/DO-178C certification artifacts available (DAL D to A) • FAA certified (SOI complete), FACE compliant