The Fibre Channel D-sub connector series features a multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is extremely low contact resistance when measured from the contact outer body to the connector flange. The Fibre Channel D-Sub series also delivers superior performance ensuring minimal RF noise and high durability up to 1,000 mating cycles, while meeting and surpassing all requirements of MIL-STD-202 for shock and vibration. Offered with 150 Ohm quadrax contacts, the connectors are available with 2, 4, 6 or 8 way insert arrangements. Additionally, D-Sub connectors feature ease of assembly, and a robust and comprehensive training package. To ensure that the correct high speed connectors are mated to address specific wiring requirements and keying functions, a keyed jack post option has been incorporated into the design. The six-positioned post allows for 36 possible keying combinations assuring that the correct Fibre Channel D-Sub plug is mated to the correct high speed receptacle. Non-keyed jack post versions are available as well. Fibre Channel D-Sub connectors feature size 3 quadrax contacts which are 30% larger than the size 9 configuration utilized in the 100 Ohm quadrax, ensuring a matched impedance signal throughout the contact mated pair at 150 Ohm differential impedance. These features ensure that Smiths Interconnect's Fibre Channel D-Sub connectors deliver the critical edge customers require.

The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

EMCORE’s IPADS-I (International) provides significant enhancements for today’s Army and Marine Corps survey teams. IPADS offers a proven, reliable, lightweight, off-the-shelf solution developed around four main components. > Compact Position/Navigation Unit (CPNU) > Control and Display Unit (CDU) > Battery and Charger Unit (BCU) > Porro Prism Assembly (PPA) All components are housed in a robust frame that allows for easy component access and stability, while facilitating a ready, two-person transfer between vehicles and aircraft. Features High-precision common survey enables efficient mass fires Impervious to jamming (inertial mode) Embedded Selective Availability Anti-Spoofing Module (SAASM) GPS option Navigation aids (compass rose and digital maps) In-vehicle and offset survey Combat-proven Embedded Built-In Test (BIT) High reliability MTBF, low mean time to repair (MTTR) No periodic calibration required Applications Artillery Survey to Mark: Survey Control Point (SCP) position; used to initialize weapon systems Orienting Line (OL) position and azimuth; used to initialize and align artillery assets

KMC Series includes high-density board to board and board to wire interconnect solutions available in multiple configurations from 26 to 162 positions with a 0.5mm contact diameter and is widely used in harsh environments. Space grade/ESA/ESCC qualified are also available.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

A comprehensive line of products in C, X, Ku, Ka and Q-band for SATCOM and 5G&6G are available as off-the-shelf items or custom-made design upon request. These products are specialized in various types of mobility environment including airborne application. We serve the customers in more than 20 countries with fully field proven products. The new era of wireless communication requires a converged solution of SATCOM and 5G&6G in the aspects of technologies and services. XMW is preparing for the new era with the solutions inherited from SATCOM and 5G&6G business for more than a decade.

This is a contact-type and non-contact optical cable assembly for high-speed transmission of large-capacity signals such as video signals. It is a cable assembly for optical signal transmission in compliance with MIL standards by utilizing a contact/non-contact connector developed by Yeonhab Precision.