High-quality aerospace-grade aluminum forgings, produced from 6000 and 7000 series ingots sourced from reputable foundries. Our company specializes in forging and heat-treating to meet specific customer requirements, including ring and plate shapes, for defense industry applications.

Each SCU can interface with up to eight (8) fuel probes with temperature detection and/or fuel probes with compensators. It will process capacitive and resistive readings to determine the fuel heights for each probe and transmit the calculated fuel volume to the cockpit.

Dual Narrow Linewidth Amplifier - 3kW per channel

Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner

No Coding Required: Create XR content effortlessly with a drag-and-drop interface. Industry-Specific Solutions: Suitable for manufacturing, logistics, energy, and various industries. Multi-Device Compatibility: Works on PCs, tablets, smartphones, and smart glasses (VisionX). Real-Time Collaboration: Multiple users can edit and share content simultaneously.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

Product Assurance Consulting : 1. The recent paradigm shift in newspace has expanded opportunities for new companies to enter the space industry. 2. Space product warranties pose a barrier to new entrants into the space industry. 3. MID has developed various programs to provide product warranty consulting services to new entrants to the space industry and offer customized services to our clients.

3U OpenVPX SSD is a rugged, reliable, high-performance NVMe SSD solution. Since the 3U OpenVPX SSD is a NAND flash-based SSD, reliability is improved in environments with vibration and contaminants compared to existing hard disk drives (HDDs). Additionally, it has the advantage of low latency and high-speed data transfer speed through the NVMe interface based on PCI Express. This is a significant advantage in high-risk combat environments.