• Threaded, bayonet or push-pull coupling connectors • Mil spec series • Coaxial connectors • Power connectors • F/O & data connectors

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

1. 용도 : 전자제어기로부터 공급되는 전력으로 빠르게 가열하는 장치 2. 기능 : 8,200 Kcal/hr(차체 특성에 따른 난방효율 최적화 설계, 운용간 안정성 확보) 3. 관련 장비/체계 분야 : 단거리지대공무기(천마) 4. 관심 협업 분야 / 목표시장(국가) - 전차ㆍ장갑차 그 밖의 전투기동장비 / 국내 방위산업시장 및 해외 (미국, 멕시코, 프랑스, 이스라엘, 인도네시아, 말레이시아, 아랍에미리트, 유엔국 등) 5. 기타사 - 영구자석 기반 발전기 기술 및 고효율 에너지변환 기술(특허보유) - 국방규격화 완료, 해외수출 경쟁력 제품

FOBEX 38999 MIL-DTL-38999 An optical connector which is applied to beam expanding optical signal transmission technology into a connector designed according to military standards. It can be used in a variety of adverse conditions such as extreme temperature, vibration, shock, humidity, and dust. It has little impact from outdoor contamination and is easy to maintain, making it easy to use tactically. FOBEX 83526 Ensures stable and reliable data transmission in extreme environments. Designed with a hermaphrodite type for easy connection and disconnection over 3,000 times, the extended beam technology minimizes loss caused by dust or contaminants from outdoors. FOBEX-P Fiber optic ferrules with expandable beam technology, designed to replace 1.6mm military fiber optic ferrules for tactical applications

- Protective Steel for military application. - Protective Steel for civil application.

Processor - NXP Quad Core PowerPC QorIQT2080 up to 1.8GHz - 6 DMIPS/MHz per core (up to 43,200 DMIPS@1.8GHz) - 128b AltiVecSIMD unit (up to 72 GFLOPs@1.8GHz) Memory - 4GB soldered 64-bit DDR3L SDRAM with ECC - 256MB 16-bit NOR flash - 64GB SATA NAND SSD - 512KB NvRAM Form Factor - 3U OpenVPX - Conduction-Cooled

L-ORAS (Low-Altitude Flight Operations Risk Assessment System) is the world’s first fully integrated software platform redefining flight safety for low-altitude UAVs. Designed for commercial operators, regulators, and defense users, it leverages advanced automation to simplify evaluations and deliver unmatched speed and reliability. Traditional UAV risk assessments are slow, fragmented, overly reliant on limited expertise, causing delays, administrative burdens, and safety blind spots. Competing tools fail to unify international standards or provide end-to-end compliance, leaving approval gaps. L-ORAS introduces breakthrough innovation by seamlessly incorporating both SORA (Specific Operations Risk Assessment) by EASA (European Union Aviation Safety Agency) and SRM (Safety Risk Management) by FAA (Federal Aviation Administration). The platform automates risk classification, generates comprehensive assessment portfolios, and consolidates operational data—enabling high-confidence approvals, insurance optimization, and safety oversight. Looking ahead, L-ORAS will emerge as a global standard-bearer, driving UAV innovation and becoming the leader in safe, scalable, trusted unmanned flight operations.