Introducing the EXOtube universal modular adapter for rideshare missions. This launch vehicle-agnostic payload stack provides maximum flexibility to customers and simplifies mission execution for our launch partners. EXOtube is an adaptive load-bearing structure for adaptation, integration and launch and deployment of the entire range of smallsats from cubesats to 1000 kg microsats.

- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

The SC-SBCRTM-V2 is a Rear Transition Module (RTM) designed to extend the I/O functionality of the SBC6511 single-board computer. Mounted on the rear side of the main VPX backplane, this module provides additional I/O expansion through Micro-D and D-sub connectors for synchronization signals, two Ethernet ports, two Mini-DisplayPort video outputs, two USB interfaces, and MMCX connectors. It enhances system flexibility and connectivity for embedded and radar signal-processing applications.

The NSP-8 is IMSAR’s most powerful radar. It is capable of advanced Synthetic Aperture Radar (SAR), Moving Target Indication (MTI), and Magnitude Change Detection (MCD). When paired with an airborne server, it can even produce SAR Motion Video (SMV). IMSAR adds value to its exceptional engineering with a production time much faster than industry standard. The NSP-8 is designed for durability and thoroughly tested with a Mean Time Before Failure (MTBF) of over 2,000 hours. Additionally, it’s weatherized for optimal performance over land and sea. With this sensor, IMSAR’s users can understand the bigger picture.

The COX640AV embodies COX’s cutting-edge cooled MWIR imaging technology, delivering unparalleled performance for the most demanding applications. Its 640x512 resolution and 15μm pixel pitch InSb sensor achieve thermal sensitivity of less than 20mK, ensuring crystal-clear imaging for precise analysis. Capable of operating across a wide temperature range, the COX640AV supports multiple imaging modes and advanced processing functions including AGC, NUC, and customizable color palettes. This ensures adaptability to a variety of mission-critical environments such as defense, aerospace, scientific research, and industrial inspection. In addition to superior imaging quality, the COX640AV is designed for reliability and operational readiness. With rapid image stabilization after startup and robust construction, it performs consistently in harsh environments where stability is non-negotiable. Its combination of cooled MWIR precision, advanced processing features, and rugged design positions the COX640AV as a trusted solution for customers who require accuracy, speed, and durability. By integrating COX’s proprietary calibration expertise, it not only provides outstanding real-time imaging but also guarantees long-term reliability and service continuity.

1. Feature - An equipment combining visible and short-wave infrared (SWIR) cameras, capable of daytime reconnaissance, surveillance, and target acquisition, applicable to various systems. - It can be mounted on and integrated with various types of weapon systems. - With SWIR mode, targets can be monitored, tracked, and acquired even in conditions with haze, fog, or dust.

CPPA Procedure : 1. Requirement Analysis for Customer's parts Purchasing 2. Parts Purchase Negotiations 3. Parts Purchasing Management 4. Component Reliability Testing 5. Space Parts Documentation Support 6. Delivery to the Customer

Interconnect Wire Harness and Cable Assemblies are the connectivity backbone of electronic systems. Fabricated in a factory setting, build-to-print wire harness assemblies enable the OEM manufacturer to reduce the time and expense of in situ interconnection of electronic devices used in complex air, sea, land and space applications.