The SC-DSPRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the DSP282A. When the DSP282A board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-DSPRTM board into the back of the Backplane. The DSP282A board consists of two computing nodes. To support this, Ethernet, USB, MMCX, and mini-HDMI ports are allocated to each node, and synchronization signal input ports can also be used simultaneously on both nodes.

A compact EO/IR gimbal camera system designed for UAVs, unmanned surface vehicles, and defense platforms. The system integrates a QVGA/VGA-class LWIR thermal imager and a high-resolution EO camera within a stabilized gimbal, ensuring reliable performance in diverse environmental conditions. Optimized for ISR (Intelligence, Surveillance, Reconnaissance) missions, the system provides detection, recognition, and identification (DRI) capabilities with low-SWaP (Size, Weight, and Power) characteristics.

The HPD/HPF PCB Connectors series is crafted with precision, integrating advanced Hypertac contact technology for dependable connectivity. With a lifespan of up to 100,000 insertion/extraction cycles, these connectors ensure consistent performance in challenging environments. They feature optimized power efficiency and strong high-current handling capabilities, enhancing system efficiency while maintaining reliability. Engineered to withstand tough conditions, these connectors offer robust connectivity solutions across various applications, promoting seamless operation, productivity, and long-term dependability for your systems.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Winchester Interconnect Micro, formerly known as Ulti-Mate Connector, designs and manufactures a broad range of precision engineered Micro D Connectors that are designed to be environmentally sealed, making them suitable for a wide range of applications. They can operate in temperatures ranging from -55°C to 125°C, with high-temperature versions available for more extreme environments (indicated by "HT" in the product name). These connectors come with 9 to 100 contacts and adhere to the MIL-DTL-83513 standard. And, leading manufacturer for high density, lightweight Nano connectors available in 9 to 51 contacts, these connectors cater to various applications. As a QPL qualified supplier for MIL-DTL-32139 product.

Military and Commercial

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

Phased Array Multi Function Antenna including Radome