EMCORE’s SDI170 IMU is designed as a performance-compatible inertial system that is form, fit, and functional with a legacy RLG-based IMU product, but with superior overall performance, versatility, and a significantly higher MTBF (Mean Time Before Failure) rating over ruggedized environments. The tactical performance of the SDI170 IMU is based on EMCORE’s mature, proven, dependable and accurate quartz MEMS inertial sensor technology in our SDI500 tactical-grade IMU. EMCORE’s quartz technology enables repeatable high-volume production of precisely machined sensor structures combined with the inherent large signal output and thermal stability of quartz materials. The SDI170 IMU is designed for demanding, mission-critical, rugged environments and ideal for continuous use applications with no wear-out components, highly linear accelerometer performance and longer life compared to competing alternatives. It is constructed with EMCORE’s latest generation quartz gyros, quartz accelerometers, and high-speed signal processing to achieve outstanding precision performance. The solid-state quartz sensors and hermetically sealed IMU construction provide reliable MTBF and a 20-year operating and storage life. Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection and flexible input power compatibility make the SDI170 IMU easy to use in a wide range of higher-order integrated commercial and defense system applications.

The intelligent operations you didn't know existed - and didn't know you needed. Let data be your co-pilot with Honeywell Forge industrial-grade software.Fol...

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

Our commercial aerospace AGSE products are relied upon by aviation companies around the world to keep their aircraft serviced and flying. The test and servicing equipment we engineer and distribute are key to the success of commercial aviation.

[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

ABC designs and develops many components or functions to best meet the requirements of the needs in the special functions required in the test facilities. Essentially, these are hydraulic components that cover all types of fluids from very low pressure to very high pressure in a very wide scope of flow ranges.

SBC (single board computer) for VMEbus based on TI DaVinci CPU, ARM Cortex-A8 1.2GHz, C674x 1GHz DSP, SGX530 3D Graphics Engine, DDR3 memory, Giga Ethernet 2 port, video input/output 5 port, SATA-2 2.5" SDD This is a built-in SBC board for video processing. Application field: image processing system Shipboard EO video system Video encoder/decoder system Multi-channel video storage/distribution system Characteristic: VME type multi-channel video recorder Supports 4-channel NTSC/PAL video compression (H.264) Supports 4-channel audio recording Supports local video and audio playback Supports network RTSP function Supports Ethernet-based GUI control

The AB-M1300 is a 1.3 ton-class eVTOL AAM. With a wingspan of 10 meters, the AB- M1300 is a crewed–uncrewed hybrid aircraft aiming for commercialization in 2028. Falling under the Light Sport Aircraft (LSA) certification category, it can carry up to two occupants, reach a maximum speed of 400 km/h, operate for two hour of flight time, has a maximum take-off weight (MTOW) of 1.3 tons, and a payload capacity of 250 kg. The AB-M1300 is designed for a variety of missions, including mid-mile logistics, personal leisure use, and pilot training.