EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

SCD’s advanced 12μm VOx Microbolometer stands out as the ideal choice for VGA LWIR systems. With its exceptional image quality, remarkably low Noise Equivalent Temperature Difference (NETD), very low time thermal constant (Tau), rapid image acquisition, and minimal weight, SCD’s Microbolometer ranks among the leading LWIR sensors in the market. It is suitable for a wide range of applications, specifically tailored to meet challenges associated with Size, Weight, Power (SWaP) constraints and highly dynamic applications. This product continues SCD’s long heritage uncooled detectors technology, along with our 25μm and 17μm pitch families, fielded and combat proven for more than 20 years.

The NSP-7 combines IMSAR’s typical reliability with increased capabilities: for example, the ability to detect footprints. It can even perform SAR Motion Video (SMV) when paired with an airborne server. The IMSAR NSP-7 radar system is a high-performance, weatherized radar pod engineered for long-range Intelligence, Surveillance, and Reconnaissance (ISR) and maritime/ground surveillance missions. With advanced Synthetic Aperture (SAR) and Moving Target Indication (MTI) capabilities, the NSP-7 delivers exceptional imaging and detection in a rugged, low-SWaP (Size, Weight, and Power) package.

- Detects fire through heat sources when installed in areas where optical fire detectors are difficult to apply, such as in the presence of contaminants or obstructed visibility - Capable of detecting fire even if the sensing line is severed - Length can be adjusted depending on the equipment applied

- FOG based Inertial Navigation System for Gyrocompass - Position Accuracy(INS/GPS): < 3 m - Heading Accuracy: < 0.1º  sec (LAT) - Attitude Accuracy(Static): 0.01º - Attitude Accuracy(Dynamic): 0.01º - Operating Voltage: 9 to 36 VDC - Power Consumption: < 15 W (typ.) - Dimension(L x W x H): 330 mm x 192mm x 180mm

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

The IMX-5 delivers Tactical Grade Inertial performance powered by TWO of the most powerful GNSS receivers on the market. Inside the aluminum enclosure, this sensor is prepared to take you through difficult terrain. The IMX-5 provides sensor fusion for roll, pitch, magnetic heading, velocity, RTK precision position and Dual GNSS Compass Heading. Features Tactical Grade IMU Dual Onboard Multi-Frequency (L1/L2) GNSS Receivers Dual GNSS Compassing RTK Centimeter Level Precision Rugged IP40 Aluminum Enclosure Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

- Protective Steel for military application. - Protective Steel for civil application.