Tescan AMBER integrates BrightBeam™ field-free SEM optics with the Orage™ Ga⁺ FIB and fully automated lamella workflows. Designed for versatility, it supports inverted and planar sample prep, nanoprototyping, and gentle final polishing across a wide range of material types.

The PANDION Q450 is a modular drone that allows users to swap out its detachable D-ARK module pack, enabling flexible configurations of cameras and internal PCBs. As the drone industry diversifies, users can select purpose-specific module packs, allowing a single product to meet various consumer needs with multiple configurations. The D-ARK module pack integrates the camera, flight controller (FC), and all circuitry, allowing users to upgrade, modify specifications, or perform maintenance simply by swapping the module. Designed to offer an optimized configuration for a wide range of users, this modular system provides a cost-effective solution tailored to diverse needs in the drone industry. PANDION Q450 has a solid design with water and dust resistance for rugged environments.

Nas-52 or Night Attachable Sight gives law enforcement and military personnel the versatility in operations through attaching simple night vision device prefixed to daytime sight which makes available to engage in surveillance or to acquire targets regardless of ambient light conditions. NAS-52 is a clip-on system designed to mount in front of any kinds of daytime riflescope, and it gives daytime riflescope the night vision capability. Sniper or designated shooter using daytime scope will significantly need this performance for night time operation.

Functional Military Boonie Hat Optimized for Mission Execution The MIF Tactical Boonie Hat is a functional hat designed to ensure efficient mission performance in tactical operational environments. With both breathability and durability, it maintains wearer comfort even in harsh outdoor conditions and supports stable activity during operations.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

ELECTROMECHANICAL RELAYS FROM 2 TO 10 AMPS.

The Haigh-Farr family of rugged Blade antennas is available in frequencies ranging from UHF to upper C-band. Since 1972, our blade antennas have a demonstrated reliability of use in high-performance airborne applications. In addition, they are used extensively in ground-based vehicles such as race cars, trucks, tanks, and motorcycles, to name a few. 60XX & 61XX Series: Our 60XX & 61XX Series blade antennas have quasi-uniform null-free hemispherical gain patterns and may be provided in either straight or rounded blade configurations. 60XX and 61XX Series blade antennas are available in standard and high powered versions. With sufficient airflow, our standard blades handle an average power of 25 - 30W CW and our High Powered blades can handle an average power of 80W CW. These blade antennas share a common footprint with varying height. Multiband: Haigh-Farr Multiband blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas with additional bandwidth. UHF: Haigh-Farr UHF blade antennas provide coverage down to 380 MHz and up to 470 MHz in two unique form factors. Our 6300-X series of blade antennas utilize identical materials and construction as our 60XX & 61XX series blade antennas in the larger blade structure required at UHF-band. Our P/N’s 16230-XXX and 16400-XXX are low profile, mechanically robust designs that can be custom tuned to meet discrete UHF frequencies, with an option to add thermal protection for high temperature environments.

SAT-PRE establish emergency communication networks for communication-disrupted areas during natural disasters and catastrophes. SAT-PRE ensures communications between commands in deepest operational areas and also between team members. it maximized communication success in adverse terrain, weather and other terrible conditions. The rate of transfer success is over 90%. The implementation of various communication methods such as voice PTT, automatic location reporting, and specialized transmission and reception using satellites as we reflects the latest technology based on Iridium 2nd generation satellites. The mission control center's CL-700 receives information transmitted from the operational area SAT-PRE in real time for up to 1,000 units and shares on-site situations by linking with other systems.