HyperStac RX Series is a Z axis interconnection solution designed for all types of micro-electronics applications requiring reliable and compact packaging solutions. The Hyperstac RX Series meets the needs of the Defence, Avionics and Space electronics applications.

It is mounted on a weapon system such as a fuze that rotates at high speed, and is a high-sensitivity and high-performance GNSS receiver capable of providing up to 10Hz output and multi-band GNSS signal reception as well as narrowband jamming rejection capability. You can get more than 20dB anti-jamming capability comparing with traditional high-sensitivity receivers. Features: Mounted Anti-Jamming Algorithm High Sensitivity & Multi-Band GNSS(GPS/GLONASS/Galileo) Receiver Optimum Reception Even in Harsh Battlefield Conditions Currently Applying Weapon Systems such as Small Fuze

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

For electrical and electronic signal connections inside and outside the hermetic equipment, it reliably protects the device from extreme temperature/humidity changes, vibration and physical/chemical effects, and transmits signals and currents without loss. These connectors use special glass or ceramic as insulation and are used in furnaces, power breakers, submarines, gas control systems, transformer safety devices, etc. Key features of closed connectors: It completely blocks the interior from the outside environment to keep it vacuumed or pressurized. Durability: It works reliably in extreme environments (high temperature, low temperature, humidity, chemicals, etc.). Electrical performance: It delivers electrical signals or power without loss.

Developed in 2002 as a single-soldier, short-range, anti-tank weapon system, we continue to work with soldiers to provide the weaponry needed to succeed. Backed by nearly two decades of experience, the resurgence of the tank in battle validates our expertise in this field. It’s the same old story – and David still beats Goliath.

Fast connection and disconnection are possible, and it provides a stable connection against vibration or shock. It is IP67-grade waterproof and can be used in humid or dusty environments. It also provides the ability to shield electromagnetic interference (EMI). Key uses: Military communications equipment, orbital vehicles and rail vehicles, aerospace industry, electric vehicles and unmanned systems, industrial equipment.

NO MELT, NO DRIP (50/50 NYLON COTTON) Incorporate 4-way stretch Tweave (Waist band, knees, Groin) Universal knee pad pockets Mesh and string rubber tip at the bottom to improve convenience Fit adjustment though the Velcro behind the knee and bottom parts to protect body temperature and support agile activity Front low profile, rear and ventilated cargo Pockets Applied MIL-SPEC threads and YKK zippers Composition Material: NYLON 50% / COTTON 50% Size : Waist 28~36, Leg S, R, L Colors MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)